AMK DS64-B 6" Dante-Enabled Coaxial Loudspeaker Assembly with PoE+

MSRP: $1,764.00
(You save $441.00 )
Support Documentation:

The AMK DS64-B is a Dante™ audio network addressable and self-amplified ceiling speaker system. The speaker is powered by PoE+ network switch meaning no external power supply is required. The speaker includes a Class D amplifier which provides effective use of power. This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations. The system comes with 6.5” coaxial 25W loudspeaker driver, CX602, that has excellent dispersion, wide bandwidth and a smooth frequency response which makes this the top choice for today’s overhead commercial applications.

One PoE+ amplified speaker can power a total of (4) speakers, including (3) additional passive speakers, with (2) speakers per audio zone.

This assembly can be used in wide range of projects for paging and background music applications. The DS64-B is ideal for hotels, education, hospitals, retail stores, performing art centers, restaurants, airports, houses of worship, and board rooms.

  • Network enabled Loudspeaker by Dante™
  • PoE+ powered without a need for local power
  • RJ45 connection for audio from PoE+ Ethernet
  • 6” polypropylene cone with inverted rubber surround
  • 1” Polyamide dome tweeter
  • Weather and water resistant.
  • 2 Channel Audio
  • UL 2043 Listed
  • 2 channels broadcasting system for two separate zones
  • No need to have separate dante enabled amp or I/O interface
  • A Single RJ45 connection to main active speaker with two conductor wire connection to each of the passive speakers
  • Highly efficient speaker driver due to barium ferrite magnet
  • Cost effective simple one system solution


  • Frequency Response
    • 100 Hz - 20 kHz (+/- 3dB)
  • Maximum SPL at 1M
    • 102 dB
  • Voice-coil diameter
    • 1."
  • Magnet
    • Barium Ferrite (for high efficiency of the speaker driver)
  • Nominal Coverage Angle (500Hz - 4kHz Average)
    • 140° Conical Average
  • Audio Input
    • Dante Audio via Ethernet
  • Output Power
    • 10W / Channel (5W per speaker)
  • Signal to Noise Ratio
    • >99dB
  • Power consumption
    • 2 Watts Standby, 25 Watts Maximum
  • Input connector on active speaker
    • RJ-45
  • Maximum wire length to companion speakers
    • 100ft at 18AWG
  • PoE+
    • IEEE 802.3at-2009
  • Controls
    • Dante™ controller software
  • UL Listing
    • UL 2043


  • Tweeter
    • 13mm polyamide hard dome
  • Woofer Cone
    • Polypropylene
  • Surround Material
    • Inverted rubber Surround
  • Crossover Frequency
    • 5.0 kHz
  • Depth
    • 8.25"
  • Diameter of the Enclosure
    • 9.25"
  • Diameter of the Grille
    • 12.75"
  • Enclosure Mounting
    • Metal Swivel Clamp
  • Net Weight of single speaker (Grille, Back Enclosure, and Loudspeaker)
    • 9.0 lbs
  • Shipping Weight (2 boxes of 4 speakers)
    • 52.0 lbs