• ARX RS-2 Remote Selector Remote Switched Stereo A/B Selector
  • ARX RS-2 Remote Selector Remote Switched Stereo A/B Selector
  • ARX RS-2 Remote Selector Remote Switched Stereo A/B Selector

ARX RS-2 Remote Selector Remote Switched Stereo A/B Selector

Call us for Pricing. 800-979-3311

No reviews yet Write a Review
SKU:
RS-2 ARX
Availability:
We will contact you for more information about your order.
Stock Status:
This is a special order item, feel free to order, we will contact you with questions or issues.

The simplest ideas are usually the best! ARX's new Remote Selector is a stereo out signal selector for the extremely popular Audibox range. The RS-2 is a Dual Channel unit with two sets of XLR Outputs and one set of XLR Inputs.

The new Remote Selector silently switches a stereo pair of XLR female input connectors to either A or B pairs of male XLR outputs

ARX "SoftSwitch" technology achieves this with no loud bangs through the audio system when switching.

Output Channel control can be selected in 2 ways:

  • Mode 1 by remote switch / relay closure (using an external power pack / wall wart), or
  • Mode 2 by 12 - 24VDC

With no DC voltage applied, Output A, the default normal audio signal, is selected.

When +12 - 24VDC is applied to Pins 3 and 4 on the Dinkle type connector, then Output B is selected.

Typical applications include remote controlled zoning, loudspeaker selection, and A-B comparison of audio units.

Another useful application is remotely switching between 2 bands, or Live Band and DJ when both are using different Speaker system.

Precision engineered
Most of the Audibox range share a common footprint and manufacturing platform. Offset lid screws enable close side-by-side mounting of multiple units.

Note: Connectors are inserted in the top of the unit. Please allow adequate space above the Remote Selector to allow for the connectors to be removed or inserted.

 
  • Frequency Response: 10Hz to 50KHz + - 0.5dB
  • Power Requirements: DC Input +12 - 24 VDC Connector 2.5mm centre pin
  • Remote Switch and External Input: 4 Pin Dinkle type socket, 5mm pin spacing. Connector supplied with unit
    • Pin 1 and 2 Remote Switch – Open Input = Channel A selected, Closed Input = Channel B selected.
    • Pin 3 and 4 Remote DC control - Pin 3 +12 - 24VDC Pin 4 0VDC / Gnd
  • Connections:
    Input Connectors: Female XLR, Wired Pin 1 Audio Ground, Pin 2 + Hot, Pin 3 - Cold
  • Output Connectors A and B: Male XLR, Wired Pin 1 Audio Ground, Pin 2 + Hot, Pin 3 - Cold
  • Chassis Ground/Earth: Via Pin 1's on Left Channels
  • Construction: All-steel polyurethane coated chassis, fibreglass PCB
 
 
 

You may also like