Audio-Technica AEW-4250A Wireless Handheld Condenser Microphone System

$1,349.00
SKU:
AEW-4250A
Shipping:
Free Shipping
old_prod_key:
CCBABA244DDC4709A7F2749B28F30711

Trade-in on YOUR TERMS! Now through March 2020, trade in your old 600MHz wireless system and get $150 back when you purchase a new AEW-4250 system! Click here for rebate process.

Audio-Technica's upgraded 4000 Series frequency-agile UHF body-pack and handheld wireless systems bring outstanding clarity and versatility to live performance, regional touring, fixed installations and more. At the heart of the 4000 Series is a rugged True Diversity half-rack receiver, the AEW-R4100a, with 996 selectable channels offered in each of two available UHF bands.

Receivers from the 4000 Series may be linked; they may be monitored by the 5000 Series system software. The included IntelliScan™ feature automatically determines and sets the best available frequencies on all linked receivers.

  • (1) AEW-R4100 Receiver
  • (1) AEW-T5400a Handheld Cardioid Condenser Microphone Transmitter
  • Operating Frequencies UHF band
    • Band C: 541.500 to 566.375 MHz (996 frequencies)
    • Band D: 655.500 to 680.375 MHz (996 frequencies)
  • Frequency Stability +/-0.005%, Phase Lock Loop frequency control
  • Minimum Frequency Step 25 kHz
  • Modulation Mode FM
  • Normal Deviation +/-5 kHz
  • Operating Range 300' typical
  • Operating Temperature Range 41° F (5° C) to 113° F (45° C)
  • Frequency Response 70 Hz to 15 kHz

Receiver Specifications

  • Receiving System Dual independent RF sections, automatic-switching diversity
  • Image Rejection 60 dB typical
  • Signal-to-noise Ratio 115 dB at 40 kHz deviation (IEC-weighted, 75 kHz maximum modulation)
  • Total Harmonic Distortion <=1% (10 kHz deviation at 1 kHz)
  • Sensitivity 20 dBµV (S/N 70 dB at 5 kHz deviation, IEC-weighted)
  • Intermediate Frequency 65.75 MHz, 10.7 MHz
  • Audio Output - Microphone (ATTN switch at "0") 25 mV (at 1 kHz, +/-5 kHz deviation, 10k ohm load)
  • Audio Output - Instrument (ATTN switch at "0") 50 mV (at 1 kHz, +/-5 kHz deviation, 10k ohm load)
  • Audio Output Attenuator (ATTN) Three-position switch: 0 / -6 / -12 dB
  • Output Connectors (Microphone) XLRM-type (balanced)
  • Output Connectors (Instrument) 1/4" (6.3 mm) TS unbalanced phone jack
  • Headphone Output
    • Connector: 1/4" (6.3 mm) TRS ("stereo") phone jack
    • Power Output: 10 mW + 10 mW at 1 kHz, +/-5 kHz deviation into 32 ohms; maximum output, 220 mW + 220 mW into 32 ohms.
  • Antenna Power DC 10V-12V, 20 mA (BNC-type jack)
  • Power Supply 100-240V AC 50/60 Hz; 8W
  • Dimensions 8.31" (211.0 mm) W x 1.74" (44.0 mm) H x 9.26" (235.0 mm) D
  • Net Weight 3.8 lbs (1.7 kg)
  • Accessories Included Detachable IEC-type AC power cable; two flexible UHF half-wave antennas; link cable; rack-mount adapters

Transmitter Specifications

  • RF Power Output High: 35 mW; Low: 10 mW, nominal
  • Spurious Emissions Under federal regulations
  • Dynamic Range >=110 dB, A-weighted
  • Microphone Element: Cardioid Condenser
  • Batteries Two 1.5V AA alkaline (not included)
  • Current Consumption High: 185 mA; Low: 165 mA, typical
  • Battery Life Approximately 6 hours (High); 8 hours (Low), depending on battery type and use pattern
  • Dimensions: 9.41" (239.0 mm) long, 1.97" (50.0 mm) maximum diameter
  • Net Weight 10.0 oz (285 g)
  • Accessory Included AT8456a Quiet-Flex™ stand clamp

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at http://www.fcc.gov/cgb/wirelessmicrophones/.

 

FCC Consumer Alert

This disclosure informs consumers that wireless microphone users must cease any wireless microphone operations in the 600 MHz service band no later than July 13, 2020. In addition, in many instances they may be required to cease use of these devices earlier if their use has the potential to cause harmful interference to 600 MHz service licensees’ wireless operations in the band.

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website.