Audio-Technica AEW-5244A Wireless Dual Handheld Dynamic Microphone System

$3,099.00
SKU:
AEW-5244A
Shipping:
Free Shipping
old_prod_key:
5E7C1E6120F5435ABFD298C08CC7B2C6

Trade-in on YOUR TERMS! Now through March 2020, trade in your old 600MHz wireless system and get $450 back when you purchase a new AEW-5244 system! Click here for rebate process.

Designed for use on professional tours, in stadiums, concert halls, houses of worship and other demanding audio environments, Audio-Technica's dual-receiver Artist Elite® 5000 Series provides incredible audio quality and proven, critically acclaimed performance for artists, broadcasters and presenters worldwide.

The newly upgraded 5000 Series sets standards for wireless live sound, with its dual-compander circuitry that processes high and low frequencies separately. It also features A-T's proprietary IntelliScan™ capability, 996-channel frequency agility, True Diversity operation, soft-touch controls, digital Tone Lock™ squelch, backlit LCD displays on all transmitters, and locking battery doors on the UniPak® body-pack transmitters.

With two independent True Diversity receivers in a single full-rack housing, the 5000 Series conserves rack space while providing outstandingly reliable and flexible performance. Receivers may be linked to form a complete system in which the built-in IntelliScan capability automatically determines and sets the best available frequencies on all linked receivers. Equipped with Ethernet ports, the 5000 Series receiver allows computer management and control from anywhere via new wireless control software; access computer control from a front-of-the-house rack in the same room, or clear across the country, making it truly a 21st century product.

  • (1) AEW-R5200 Dual Receiver
  • (2) AEW-T4100a Handheld Cardioid Dynamic Microphone Transmitters
  • Operating Frequencies
    • UHF Band C: 541.500 MHz to 566.375 MHz (996 frequencies)
    • UHF Band D: 655.500 MHz to 680.375 MHz (996 frequencies)
  • Frequency Stability +/-0.005%, Phase Lock Loop frequency control
  • Minimum Frequency Step 25 kHz
  • Modulation Mode FM
  • Normal Deviation +/-5 kHz
  • Operating Range 300' typical
  • Operating Temperature Range 41° F (5° C) to 113° F (45° C)
  • Frequency Response 70 Hz to 15 kHz

Receiver Specifications

  • Receiving System Dual independent RF sections, automatic-switching diversity
  • Image Rejection 60 dB typical
  • Signal-to-noise Ratio 115 dB at 40 kHz deviation (IEC-weighted), 75 kHz maximum modulation
  • Total Harmonic Distortion <=1% (10 kHz deviation at 1 kHz)
  • Sensitivity 20 dBµV (S/N 70 dB at 5 kHz deviation, IEC-weighted)
  • Intermediate Frequency 65.75 MHz, 10.7 MHz
  • Audio Output - Microphone 25 mV (at 1 kHz, +/-5 kHz deviation, 10k ohm load),
  • transformer isolated and balanced (ATTN switch at "0")
  • Audio Output - Instrument 50 mV (at 1 kHz, +/-5 kHz deviation, 10k ohm load),
  • transformer isolated and balanced (ATTN switch at "0")
  • Audio Output Attenuator (ATTN) Three-position switch: 0 / -6 / -12 dB
  • Output Connectors (Microphone) XLRM-type, balanced
  • Output Connectors (Instrument) 1/4" (6.3 mm) TRS balanced phone jack
  • Headphone Output
    • Connector: 1/4" (6.3 mm) TRS ("stereo") phone jack.
    • Power Output: 10 mW + 10 mW into 32 ohms (at 1 kHz, +/-5 kHz deviation); maximum output: 220 mW + 220 mW into 32 ohms.
    • Headphones switchable between Channel 1 and Channel 2.
  • External Mute 1/4" (6.3 mm) TS unbalanced phone jack, each channel
  • Antenna Power DC 10V-12V, 20 mA (BNC-type jack)
  • Computer Interface
    • Type: Ethernet, 10BaseT mode
    • Connector: RJ-45
    • Proprietary Software: supplied on CD-ROM
  • Power Supply 100-240V AC 50/60 Hz, 15W
  • Pass-through AC Power Outlet 100-240V AC 50/60 Hz, 5A maximum
  • Dimensions 18.98" (482.0 mm) W x 1.74" (44.0 mm) H x 10.85" (275.5 mm) D
  • Net Weight 8.8 lbs (4.0 kg) without accessories
  • Accessories Included Detachable IEC-type AC power cable; two flexible UHF half-wave antennas; link cable; IEC-type AC pass-through cable; front-mount antenna cables and connectors; CD-ROM with computer control interface software

Transmitter Specifications

  • RF Power Output High: 35 mW; Low: 10 mW, nominal
  • Spurious Emissions Under federal regulations
  • Dynamic Range >=110 dB, A-weighted
  • Microphone Element: Cardioid Dynamic
  • Batteries Two 1.5V AA alkaline (not included)
  • Current Consumption High: 185 mA; Low: 165 mA, typical
  • Battery Life Approximately 6 hours (High); 8 hours (Low), depending on battery type and use pattern
  • Dimensions: 9.33" (237.0 mm) long, 1.89" (48.0 mm) diameter
  • Net Weight: 9.7 oz (276 g) without batteries
  • Accessory Included AT8456a Quiet-Flex™ stand clamp

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at http://www.fcc.gov/cgb/wirelessmicrophones/.

 

FCC Consumer Alert

This disclosure informs consumers that wireless microphone users must cease any wireless microphone operations in the 600 MHz service band no later than July 13, 2020. In addition, in many instances they may be required to cease use of these devices earlier if their use has the potential to cause harmful interference to 600 MHz service licensees’ wireless operations in the band.

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website.