Power Management More power. Less risk.
The RS-4 power sequencer spreads the initial inrush current of your gear over four steps allowing you to power up more gear safely than ever before on a single 15 amp circuit. With eight outlets and a 15 foot long cord, you can use the RS-4 anywhere with all your gear such as guitar, bass, keyboards and P.A. systems.
Start with Standard Mode were you can independently adjust on and off delay sequence from 1-15 seconds for potentially 45 seconds total delay. Or choose from one of the three new sequence modes of operation:
When AC power is applied to the RS-4, the unit will immediately begin the On Delay Sequence. This is useful in a stage or studio environment where the RS-4 may not be the main power switch but you still want the instant on convenience of a conventional power strip but with the added advantages of the power sequencer.
In this mode, receptacle one will always be on while the On/Off Delay Sequence for the three remaining receptacles can be set from 1-15 seconds and engaged with the footswitch. This mode is useful to keep any piece of gear on continously, like a computer or a light.
When you buy a ROCKN STOMPN power strip, you are buying the last power strip you'll ever need. Each and every ROCKN STOMPN power strip comes with a lifetime warranty!