DPA 4066-F Miniature Omnidirectional Headworn Microphone, Microdot Termination, Beige

Free Shipping

With its wide range of connection adapters, the DPA 4066-F headworn microphone in beige may be used with most professional wireless systems.

The DPA 4066-F headworn microphone in fawn beige features very easy and fast adjustment possibilities. The headband construction is unique in design because it gives the user the choice between left and/or right mounting and colour change. It is also possible to use the MMB4066 Miniature Microphone Boom, Omnidirectional, separately, in applications where the headband is not needed. The 4066 offers a clean and transparent sound quality with lots of headroom.

Attention has been paid to the humidity problems that often occur in theatrical applications. A double vent protection system, a drop stopper on the microphone boom, together with water resistant materials inside the microphone, makes it more than difficult for the humidity to cause the headband microphone to fail. The headband surface is matgold plated and headband earhooks are covered with a silicon hose.

The sensitivity is 6 mV/Pa to match the level of the human voice to the general input sensitivity of most wireless transmitters. If powered correctly the microphone will be able to handle sound pressure levels up to 144 dB SPL before clipping occurs.

A wide range of connection adapters makes it possible to use the 4066 with most of the professional wireless systems available plus 48 V phantom XLR connection.

4066 is delivered with 5 foam windscreens, 1 High Boost and 1 Soft Boost Miniature Grid.

This is the chosen headband for theaters on Broadway and West End.

Don't see the microphone you are looking for? Need a Microdot terminated, low-sensitivity, omnidirectional, dual-eared, brown, headworn microphone with a shorter boom? Or a handheld microphone with multiple wireless adapter options?

Call us at 800-979-3311 or contact us to get the correct microphone for your application! More options are available!


FCC Consumer Alert

This disclosure informs consumers that wireless microphone users must cease any wireless microphone operations in the 600 MHz service band no later than July 13, 2020. In addition, in many instances they may be required to cease use of these devices earlier if their use has the potential to cause harmful interference to 600 MHz service licensees’ wireless operations in the band.

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website.