The AS-1100 packs an amazing punch. The transmitter has stereo XLR/¼" inputs, headphone output, and LCD display which displays the channel and input level. The Receiver has an LCD with channel, battery level, and RF/AF indicator. The AS-1100 is perfect for anyone looking for their first system or to upgrade to the next level.
System Includes- (1) AS-1100T Transmitter with Rack Ears
- Transmits in Stereo or Mono
- Light Up LCD Display
- Channel Number and Frequency
- 120 Selectable Channels
- XLR / ¼" Combo Input
- AF L/R Indicator
- RF Output
- 10 mW
- LCD Display with Backlight
- Headphone Output Volume Control
- 4 Bar Battery Life Indicator
- RF and AF Indicator
- 100 mW Headphone Output
- 2 AA Batteries
- 3.5 oz (100 g)
The EB-10 features dual drivers with a passive crossover; one to deliver low frequencies and one to deliver the high frequencies. The EB-10 has a MAX Power Input of 150mW and a Sensitivity of 120 dB/mW. The EB-10 has a chord over 4 feet long and the ear buds weigh 7g (0.25 oz; excluding cable). The EB-10 includes zippered carrying case with a cleaning rod and three pairs of Silicon Sleeves (small, medium and large).
- Frequency Range and Transmitter Output Level
- Band: UHF
- Frequency Range: 655 MHZ and 679 MHZ
- Transmitter Output Level: 10dBm
- Operating Range: Under Typical Conditions 300' (92m)
- Note: actual range depends on RF signal absorption, reflection, and interference
- Audio Frequency Response: +/-3dB 60Hz~16KHz
- Total Harmonic Distortion: +/-30KHz deviation 1KHz tone <1%
- Dynamic Range: >90dB A-weighted
- Operating Temperature: Range 14ºF to 122ºF (-10 Cº to +50 Cº)
- Note: battery characteristics may limit this range
| FCC Consumer Alert This disclosure informs consumers that wireless microphone users must cease any wireless microphone operations in the 600 MHz service band no later than July 13, 2020. In addition, in many instances they may be required to cease use of these devices earlier if their use has the potential to cause harmful interference to 600 MHz service licensees’ wireless operations in the band. Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website. |
