Intelix FLX-88 Modular Video/Audio Matrix Switcher, 8x8

MSRP: $5,251.96
(You save $525.19 )
Free Shipping
Support Documentation:

The Intelix FLX-88 is a modular video matrix switcher that supports up to eight inputs and eight outputs. There are two input slots and two output slots; each modular input or output card supports up to four device connections. In addition to front panel control, the FLX-88 can be controlled via IR, RS232, or TCP/IP connections.

The modular input cards include the following connections: HDMI, DVI, HDBaseT (with RS232 and bi-directional wide-band IR), and analog video with digital scaling via HD15 (VGA-UXGA, RGBHV, RGBS, RGsB, RsGsBs, component video, S-video and composite video). The modular output cards include the following connections: HDMI, DVI, and HDBaseT.

Stereo audio embedding is available on the HDMI input cards to allow analog audio to be inserted into the digital signal. Stereo audio can be de-embedded using the HDMI or HDBaseT output cards. Advanced EDID management restricts sources to output only stereo audio, while emulating the native video data from the attached displays. This system allows analog audio to be switched with the paired digital video, eliminating the requirement for an additional audio matrix switcher.

Clear button caps provide legible text on the front panel, which can be customized for each installation. IR, RS232, and TCP/IP provide a wide range of options for third party control systems. Ten programmable presets provide an efficient means of configuring the video and audio distribution for common usage patterns.

The FLX-88 was designed with flexibility in mind. There are over 80 possible input card to output card combinations. Since the system is modular, the system integrator can customize their installation per their customer's needs and not the limitations of available hardware.

Distances and picture quality may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable patches. Intelix specifications are based on straight-through cabling with standard-grade Cat 5e unless noted otherwise.

  • Plug and play card-based design allows user to select between HDBaseT, HDMI, and DVI-D inputs and outputs
  • VGA input cards are available
  • Any input type to any output type (VGA - input only)
  • 200ms internal switching time - viewable switching times will vary according to destination devices
  • RS232, IR, and TCP/IP control
  • HDMI and HDCP compliant

I/O Connections

  • Supported Input Cards
  • Supported Output Cards
  • Input and Output Card
    • Securing Mechanism Thumbscrew
  • Control, Rear Panel
    • RS232 via DE-9, TCP/IP via 8P8C Connector
  • Control, Front Panel
    • Push Button, IR

Chassis and Environmental

  • Material
    • Black Painted Aluminum
  • Dimensions
    • 483mm x 356mm x 89mm (19 in. x 14 in. x 3.5 in.)
  • Rack Spacing
    • 2 RU
  • Shipping Weight
    • 5.9 kg (13 lbs.)
  • Operating Temperature
    • 0' to +40' C (+32' to +104' F)
  • Operating Humidity
    • 20% to 90%, Non-condensing
  • Storage Temperature
    • -10' to +60' C (+14' to +140' F)
  • Storage Humidity
    • 20% to 90%, Non-condensing

Power, ESD, and Regulatory

  • Power Supply
    • 100-240VAC 50/60 Hz
  • Power Consumption
    • 60 watts Fully Populated
  • ESD Protection
    • 15kV
  • Regulatory
    • CE
    • RoHS


  • Warranty
    • 2 years
  • Diagnostic Indicators
    • LCD output status and power LED
  • HDBaseT, HDMI, DVI-D, and VGA signal switching and routing
  • Extend 1080p up to 229 feet with FLX-BI4 and DIGI-HD70-R (video and audio) or DIGI-HDE (video, audio and control) or up to 195 ft using the DIGI-HD60C-R (video, audio, and control)
  • Ideal for digital signage, corporate facilities, churches, schools, conference centers, and any other facility that requires high definition multimedia distribution
  • Installation Guide
  • IR Remote
  • RS232 Cable
  • Power Cable
  • Modular Metal Blank (4 ea)
  • Rubber Feet (4 ea)
  • Intelix Pocket Screwdriver