Intelix FLX-BO4 4 Port HDBaseT Output Card

MSRP: $2,576.95
$2,319.26
(You save $257.69 )
SKU:
FLX-BO4
Shipping:
Free Shipping
old_prod_key:
1589E616818C485FA4B578F075393F04
Support Documentation:
SpecSheet_Intelix_FLX-BO4.pdf

The FLX-BO4 takes advantage of HDBaseT outputs connect any source device to a remote display, up to 70m away, utilizing standard Cat 5e cable with a TIA-568B crimp. The RS232 and wide-band IR connections for each output allow bi-directional control signals at the equipment rack to interface with display devices when used with the DIGI-HDE-R HDBaseT receivers. The optional DIGIB-EMT (IR emitter) and DIGIB-EYE (IR receiver) are required for IR control functionality.

Distances and picture quality may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable patches.

  • HDBaseT output card for FLX-8X8A, FLX-88, FLX-1616, FLX-3232
  • Four HDBaseT RJ45 outputs
  • RS232 and bidirectional IR embedding
  • Supports HDBaseT Specifications; HDMI and HDCP compliance

I/O Connections

  • HDBaseT Port
    • Four (4) 8P8C port (Shielded RJ45)
  • IR In
    • Four (4) 3.5 mm TS (Requires DIGIB-EYE)
  • IR Out
    • Four (4) 3.5 mm TRS (Requires DIGIB-EMT)
  • RS232
    • Four (4) 3 pole Euroblock Connectors

Supported Audio, Video and Control

  • Maximum Video Compatibility at 70 m
    • Deep Color 36/30/24 Bit at 1080p
  • Maximum Video Compatibility at 40 m
    • Deep Color 48 Bit at 1080p, 3D
  • Video Compliance
    • HDMI and HDCP
  • Embedded Audio
    • Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
  • IR Carrier Frequency Range
    • 33-55kHz at 5 volts
  • RS232 Baud Rate
    • Up to 115200 baud

HDBaseT Signal Characteristics

  • Maximum Distance
    • 70 m
  • Cable Requirements
    • Solid core shielded Category 5e, Category 6 or greater with TIA/EIA-568B crimp pattern
  • Bandwidth
    • 10.2 Gbps
  • Gain
    • 0 dB - 10 dB at 100 MHz
  • Resolution Range
    • 800x600 - 1920x1200
  • Signal to Noise Ratio (SNR)
    • > 70 dB at 100 MHz over 100 m
  • Return Loss
    • < -30 dB at 5 KHz
  • Total Harmonic Distortion (THD)
    • < 0.005% at 1 KHz
  • Min-Max Signal Level
    • < 0.3 V - 1.45 Vp-p
  • Differential Phase Error
    • +/-10' at 135 MHz over 100 m

Chassis and Environmental

  • Construction
    • Plug-in card with keyed black metal plate
  • Shipping Weight
    • 0.43 kg (0.95 lbs.)
  • Operating Temperature
    • 0' to +40' C (+32' to +104' F)
  • Operating Humidity
    • 20% to 90%, Non-condensing
  • Storage Temperature
    • -10' to +60' C (+14' to +140' F)
  • Storage Humidity
    • 20% to 90%, Non-condensing

Other

  • Warranty
    • 2 years
  • Matrix Switcher Compatibility
    • FLX-8X8A, FLX-88, FLX-1616, FLX-3232
  • HDBaseT Receiver (A/V and Control) Compatibility
    • DIGI-HDE-R
  • HDBaseT Receiver (A/V Only) Compatibility
    • DIGI-HD70-R
  • Infrared (IR) Emitter
    • DIGIB-EMT
  • Infrared (IR) Receiver
    • DIGIB-EYE
  • Designed for use with FLX-8X8A, FLX-88, FLX-1616, FLX-3232
  • Ideal for installations requiring long HDMI runs and remote control of source & destination devices
  • Transmit signal from remote sources: 1080p up to 229 feet