Intelix USB-WP-C-B Client Side USB Extender Wall Plate (Black)

MSRP: $66.48
$59.84
(You save $6.64 )
SKU:
USB-WP-C-B
old_prod_key:
646274D8DD024137B6179910464FFA78
Support Documentation:
SpecSheet_Intelix_USB-WP-C.pdf

Full-Speed USB Extender Wall Plate - Client Side

The Intelix USB-WP-C-series extenders transmit low speed USB 1.0, 1.1, and 2.0 signals up to 330 feet, and full speed USB 1.0, 1.1, and 2.0 signals up to 100 feet over twisted pair cabling. The USB-WP-C is installed at a remote location to connect peripherals to a host device.

Decora inserts allow installation in any setting, facilitating a clean low-profile installation in four popular colors: almond, ivory, white, and black.

The Intelix USB-WP-C is plug-and-play, does not require driver software, and uses the same USB circuit as our other USB bus power devices for installation flexibility.

Distances and picture quality may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable patches. Intelix specifications are based on straight-through cabling with standard-grade Cat 5e unless noted otherwise.

 

  • USB 2.0 full speed 12Mbps, USB 1.1 legacy support
  • Up to 330 feet cable lengths on U/UTP category 5/5e/6
  • Not for USB 2.0 high speed
  • No external power required, uses host device's 5V power
  • USB "A" female (client) to RJ45 jack connectivity
  • White Decora insert with matching surround
  • Available in almond, black, ivory, and white
  • Requires compatible host end.

I/O Connections

  • USB
    • One (1) Female USB Type A
  • Twisted Pair
    • One (1) 8P8C port (Shielded RJ45)

Supported Data and Power

  • Full Speed (12 mbps) Maximum Distance via Cat 5e
    • 100 ft.
  • Low Speed (1.5 mbps) Maximum Distance via Cat 5e
    • 300 ft.
  • RJ45 Pin Configuration
    • Pin 1: Data +
    • Pin 2: Data -
    • Pins 3, 4, 5, and 6: GND
    • Pins 7 and 8: 5V DC

Chassis and Environmental

  • Enclosure
    • ABS plastic
  • Housing Dimensions
    • 40 mm x 30 mm x 22 mm (1.57 in. x 1.18 in. x .087 in.)
  • Total Product Dimensions including Decora insert
    • 42 mm x 103.2 mm x 36.5 mm (1.65 in. x 4.0625 in. x 1.4375 in.)
  • Shipping Weight
    • 0.20 kg (0.45 lbs)
  • Operating Temperature (Environment)
    • 0° to +40°C (+32° to +104°F)
  • Operating Humidity (Environment)
    • 20% to 90%, Non-condensing
  • Storage Temperature (Environment)
    • -10° to +60°C (+14° to +140°F)

Power, ESD, and Regulatory

  • Maximum Power
    • Consumption 2.5 watts
  • Power
    • Via USB output of host device
  • Vbus Power
    • 5V DC
  • High Power Device Extension
    • (<500 mA draw) 30 ft.
  • Low Power Device Extension
    • (<100 mA draw) 200 ft.
  • Self Powered Device Extension
    • (0 mA draw) 330 ft.
  • ESD Protection
    • Contact Discharge: 2 kV
    • Air Discharge: 4 kV
    • IEC61000-4-2 1995
  • Regulatory
    • CE, RoHS

Ordering Information

  • USB-WP-C Part Numbers
    • USB-WP-C-W - White Decora insert
    • USB-WP-C-I - Ivory Decora insert
    • USB-WP-C-A - Almond Decora insert
    • USB-WP-C-B - Black Decora insert

Other

  • Diagnostic LEDs
    • Power and Status LEDs
  • Standard Warranty
    • 2 Years
  • Included Accessories
    • Installation Guide
  • Compatible Products
    • AVO-USB-H, PMI-A9B, USB-WP-H
  • Uses any Cat5/5e/6/6A twisted pair cabling
  • Extension of USB 1.1 and 2.0 full speed signals
  • Plenum routing of USB 1.1 and 2.0 full speed
  • Ideal for education, government, house of worship, corporate, residential, and any other application requiring extended USB signal distribution