The Intelix USB-WP-H-series extenders transmit low speed USB 1.0, 1.1, and 2.0 signals up to 330 feet, and full speed USB 1.0, 1.1, and 2.0 signals up to 100 feet over twisted pair cabling. The USB-WP-H is installed at a host location to connect peripherals from a remote client side extender.
Decora inserts allow installation in any setting, facilitating a clean low-profile installation in four popular colors: almond, ivory, white, and black.
The Intelix USB-WP-H is plug-and-play, does not require driver software, and uses the same USB circuit as our other USB bus power devices for installation flexibility.
- USB 2.0 full speed 12Mbps, USB 1.1 legacy support
- Up to 330 feet cable lengths on U/UTP category 5/5e/6
- Not for USB 2.0 high speed
- No external power required, uses host device's 5V power
- USB "B" female (host) to RJ45 jack connectivity
- Almond Decora insert with matching surround
- Available in almond, black, ivory, and white
- Requires compatible client end.
- One (1) Male USB Type B
- Twisted Pair
- One (1) 8P8C port (Shielded RJ45)
Supported Data and Power
- Full Speed (12 mbps) Maximum Distance via Cat 5e
- 100 ft.
- Low Speed (1.5 mbps) Maximum Distance via Cat 5e
- 300 ft.
- RJ45 Pin Configuration
- Pin 1: Data +
- Pin 2: Data -
- Pins 3, 4, 5, and 6: GND
- Pins 7 and 8: 5V DC
Chassis and Environmental
- ABS plastic
- Housing Dimensions
- 40 mm x 30 mm x 22 mm (1.57 in. x 1.18 in. x .087 in.)
- Total Product Dimensions including Decora insert
- 42 mm x 103.2 mm x 36.5 mm (1.65 in. x 4.0625 in. x 1.4375 in.)
- Shipping Weight
- 0.20 kg (0.45 lbs)
- Operating Temperature (Environment)
- 0' to +40'C (+32' to +104'F)
- Operating Humidity (Environment)
- 20% to 90%, Non-condensing
- Storage Temperature (Environment)
- -10' to +60'C (+14' to +140'F)
Power, ESD, and Regulatory
- Maximum Power Consumption
- 2.5 watts
- Via USB output of host device
- Vbus Power
- 5V DC
- High Power Device Extension (
- 30 ft.
- Low Power Device Extension (
- 200 ft.
- Self Powered Device Extension (0 mA draw)
- 330 ft.
- ESD Protection
- Contact Discharge: 2 kV
- Air Discharge: 4 kV
- IEC61000-4-2 1995
- CE, RoHS
- USB-WP-H Part Numbers
- USB-WP-H-W - White Decora insert
- USB-WP-H-I - Ivory Decora insert
- USB-WP-H-A - Almond Decora insert
- USB-WP-H-B - Black Decora insert
- Diagnostic LEDs
- Power and Status LEDs
- Standard Warranty
- 2 Years
- Included Accessories
- Installation Guide
- Compatible Products
- AVO-USB-C, PMI-A9A, USB-WP-C
- Uses any Cat5/5e/6/6A twisted pair cabling
- Extension of USB 1.1 and 2.0 full speed signals
- Plenum routing of USB 1.1 and 2.0 full speed
- Ideal for education, government, house of worship, corporate, residential, and any other application requiring extended USB signal distribution