Mackie DL32R 32-Channel Wireless Digital Live Sound Mixer w/iPad Control

$2,099.99
SKU:
DL32R
Shipping:
Free Shipping
old_prod_key:
F3F04A38B7F942C9B84971DC105B0C01
Support Documentation:
SpecSheet_Mackie_DL32R.pdf

This Live Sound Mixer from Mackie is Rack mounted and compatible with iPads.

ALL THE RIGHT I/O FOR PROFESSIONALS
The DL32R Live Sound Mixer features flexible, professional I/O in an incredibly compact design. So you can place it anywhere. It's "Built-Like-A-Tank", so it'll stand up to life on the road. Plus, it remembers your settings for quick setup.

The Mackie DL32R is a powerful 32-channel digital mixer completely controlled wirelessly from Mackie's intuitive Master Fader™ iPad® app - MIX FREE

  • 32-Channel Wireless Digital Mixer
  • Wireless Mixing
  • Multi-Track Recording & Playback
  • Fully-Loaded DSP
  • Master Fader Control App

General Digital:

  • Sample Rate: 48 kHz
  • A/D/A Bit Depth: 24-bit
  • System Latency - Analog Input > Main Bus > Analog Output: 1.5 ms
  • 0 dBFS Reference: +22 dBu

Frequency Response:

  • All inputs to all outputs: +/- 0, -1 dB, 20 Hz - 20 kHz

Distortion (THD):

  • Mic input to main output, 1 kHz, -1 dBFS: < 0.005%

Noise / Dynamic Range / Signal-to-Noise Ratio:

  • Equivalent Input Noise (EIN), 150 Ohm Termination: -128 dBu
  • Crosstalk:
  • Analog XLR input-input: < -105 dB @ 1 kHz (min. gain), < -80 dB @ 1 kHz (max. gain)
  • Analog XLR / TRS output-output: < -100 dB @ 1 kHz
  • Signal-to-Noise Ratio (ref +4 dBu, one channel and main fader at unity, A-weighted): 92 dB
  • Output Noise, Muted Output (A-weighted): -90 dBu
  • Dynamic Range:
  • Analog Input to Analog Output (one channel and main fader at unity, A-weighted): 109 dB
  • Analog Input (unity gain, to analog clipping, -60 dBFS signal, A-weighted): 111 dB
  • Analog Output (unity gain, to analog clipping, -60 dBFS signal, A-weighted): 111 dB
  • CMRR: > 70 dB @ 1 kHz (60 dB gain)

Analog Inputs 1 - 32:

  • Connectors:
  • 1 - 24: XLR Balanced
  • 25 - 32: Combo XLR / TRS Balanced
  • XLR Mic Pre: Onyx+
  • Input Impedance:
  • 1 - 24: 3 kOhms
  • 25 - 32: 3 kOhms mic (XLR), 30 kOhms line (1/4" TRS)
  • Max Input Level:
  • XLR: +21 dBu
  • 1/4" TRS: +30 dBu
  • Gain (digitally controlled analog):
  • XLR: 0 to 60 dB (3 dB steps)
  • 1/4" TRS: -20 to 40 dB (3 dB steps)
  • 48V Phantom Power (XLR): 48 VDC, 10 mA max per mic, with up to 16 simultaneously. 5 mA max per mic, with up to 32 simultaneously. Individual digital controller per channel

Analog Outputs 1 - 12:

  • Connectors: XLR Balanced
  • Output Impedance: 600 Ohms
  • Max Output Level: +21 dBu

Analog Monitor Outputs L/R:

  • Connectors: 1/4" TRS Impedance Balanced (supports balanced/unbalanced operation)
  • Output Impedance: 240 Ohms Balanced, 120 Ohms Unbalanced
  • Max Output Level: +21 dBu

Analog Headphone Out:

  • Connector: 1/4" TRS Stereo
  • Max Output Level: +18 dBu into 600 Ohms, +19.5 dBu max into 100 kOhms

AES Output:

  • Format: AES3 Professional, 48 kHz, 24-bit stereo
  • Connector: XLR Balanced
  • Output Impedance: 110 Ohms

USB - Streaming*:

  • Connection: USB 2.0 High Speed (as a device)
  • Connector: USB-B
  • Supported Windows OS (Driver installation required): Windows 7, 8
  • Supported Mac OS (Audio Class 2.0 compliant, no driver required): OS X 10.8.4, 10.9
  • Audio: 32 in / 32 out, 48 kHz, 16/24-bit

USB - HDD Recording / Playback*:

  • Connection: USB 2.0 High Speed (as a host)
  • Connector: USB-A
  • Audio: 1 - 24 channel, 48 kHz, 16/24-bit (multichannel .wav)
  • Supported Devices: USB 2.0 / 3.0 Compliant HDD
  • HDD Format: FAT32
  • Bus Power: 5V, 1A max

*NOTE: Streaming and HDD Record /Playback are NOT available simultaneously

Networking:

  • Connection (using basic Network Option Card): 100 Mb Ethernet
  • Control: Complete
  • Simultaneous Control: Up to 10 iOS Devices

iPad Support:

  • iOS Version Requirement: 8.0 or greater required
  • iPad Version Requirement Wireless: iPad 2, iPad (3rd Generation), iPad (4th Generation), iPad Mini, iPad Mini Retina, iPad Air
  • Control Application: Mackie Master Fader App (Version 3.0 or greater required)

Power:

  • Power Requirements: 100 VAC - 240 VAC, 50 - 60 Hz, Universal Supply
  • Power Consumption: 100 Watts Max
  • Line Cord: User-replaceable IEC
  • Operating Temperature (extended ambient temperature): 32° F to 104° F (0° C to 40° C)

Physical Properties:

  • Dimensions: 5.4" H x 19" W x 17.5" D (138 x 483 x 443 mm)
  • Weight: 18 lbs (8.2 kg)
  • Rack: 3RU