The Millennia Media TD-1 is a half-rack, single channel Class A recording system offering dual REAMP® outputs, selectable impedances, nine outputs, fully parametric EQ, Speaker Soak ®, HV-3 mic preamp with 65 dB gain, nine outputs, three transformers, and Twin Topology DI.
- Multiple Paths, One Goal: Total Sonic Realism
- Four distinct inputs can be optimized for any source
- Instruments -- Twin Topology® DI channel; dual-triode 12AT7 vacuum tube or discrete FET solid state
- Microphones -- discrete solid state HV-3 microphone preamplifier
- DAW or tape outputs -- Discrete solid state line level amplifier
- Guitar power amp outputs -- Speaker Soak™ technology
- Powerful yet musical tonal shading
- Two bands of mastering-grade NSEQ-2 parametric Eq; 20 Hz to 20 kHz center frequency, 0.4 to 4.0 Q
- Optimized DI input for any instrument with variable 470 k / 2 M / 10 M impedance
- Nine outputs for unlimited functionality
- Patented Re-Amp outputs with custom-designed magnetics emulate Les Paul® and Strat® pickups
- Audiophile headphone output
- Balanced and unbalanced monolithic outputs
- Balanced and unbalanced discrete FET outputs
- Microphone level output with large-geometry DIT-01 transformer: -3 dB 3 Hz -- 300 kHz
- Effortlessly musical performance at all dynamic levels
- Input headroom >100 V, output headroom > 30 V
- 100% effective hum removal with numerous ground lifts & isolations
- Built for critical professional applications
- Ultra-clean toroid power supply: internal sub-chassis
- Gold connectors, OFC audio wiring, silver Teflon power wiring
Preamplifiers and General
- Instrument / DI Input Amplifier Twin Topology®
- TUBE: Selected twin triode vacuum tube amplifier (200 V)
- SOLID STATE: Selected all discrete J-FET amplifier (50 V)
- THD + Noise 20 Hz - 30 kHz (35 dB Gain) 0.0005% typical mic / line, 0.03% typical vacuum tube
- Intermodulation Distortion 0.0009% typical mic / line, 0.03% typical vacuum tube
- Frequency Response @ -3 dB points
- 3 Hz to 300 kHz, typical. Varies with routing & topology
- Maximum Balanced Line Input Level +23 dBu (+43 dBu with Pad engaged or >110 Volts rms)
- Maximum DI Input Level (Both Tube & SS) +18 dBu (+26 dBu with Pad engaged or >15 Volts rms)
- Maximum Output Level
- +32 dBu active balanced outputs, +26 dBu unbal outputs
- Maximum System Gain 45 dB standard (65 dB with optional HV-3 mic preamp)
- Input Impedance (DI)
- Switchable: 470 kilohms / 2 megohms / 10 megohms
- Noise (Mic) (60 dB gain) -128 dB EIN, 150 ohm source, -130 dB EIN common source
- Noise (Line) (10 dB gain) -105 dBu
- Noise (DI) (10 dB gain) -90 dBu (solid state)
- Phase Error (EQ out) Less than +/- 5 degrees 50 Hz to 20 kHz
- Maximum Boost and Cut +/- 15 dB (21 step detent
- "Q" Range Q+ 0.4 to 4.0 sweepable
- Low Freq sweep Switch In: Pure Class-A Discrete J-FETs
- Hi Freq sweep Switch Out: Pure Class-A Triode Tubes
- Power Consumption 35 watts maximum
- Power Requirements Selectable: 100-120, 200-240 V ac, 50/60 Hz
- Dimensions/Shipping Weight 8.5" W x 3.5" H x 13.0" D, 20 lbs.
