One Systems 108/HSB 8" Direct Weather Subwoofer

$820.00
SKU:
108/HSB-BLACK
old_prod_key:
B540A9B34DC4436694CCD0658A60AA88
Support Documentation:
Datasheet_OneSystems_108HSB.pdf

The 108/HSB is a single 8" high output, low frequency subwoofer sound reinforcement system. The speaker utilizes an injection molded enclosure designed for use in direct weather applications. This product is intended for venues where additional low frequency acoustic output is required in conjunction with the 108/HTC, 108/HTH, 106/HTH and 104/HTH One Systems enclosures.
The 108/HSB may be used in outdoor installations, as well as indoor applications where extended low frequency output or additional bass response is required. The unique design of the 8-inch woofer provides an excellent combination of high sound pressure levels and low distortion.

The 108/HSB is designed for bi-amp applications only. The 108/HSB does not include an internal passive crossover.

The enclosure may be configured for either low impedance (8 ohm) operation or 70V/100v high impedance operation. Wiring instructions are found on the last page of this data sheet.

  • Weather Resistant Eight-Inch Low Frequency Subwoofer
  • Injection Molded High IP45 Enclosure
  • Optimized for use with the 108/HTC, 108/HTH, 106/HTH and 104/HTH
  • 1 x 8 inch ONE SYSTEMS long excursion eight-inch woofer
  • Multiple M8 Flying Points
  • Low impedance (8 ohm) and 70V/100V High impedance operation
  • Barrier Strip Inputs with Gland Nut Weather Cover
  • Frequency Response:
    • 43Hz – 150Hz
  • Coverage Pattern:
    • Essentially Omnidirectional
  • Active Crossover Frequency:
    • Recommended 100Hz (150Hz max)
  • Inputs:
    • 4 position barrier (Low Z mode)
    • 5 position barrier (Hi Z mode)
  • System Sensitivity:
    • 88dB (half space)
    • (1 watt-1 meter)
  • Power Handling:
    • 200 watts Continuous
    • 400 watts Program
    • 800 watts Peak*
    • * NOTE: All system power handling rating are amplifier headroom dependent
  • Nominal Impedance:
    • 8 ohms (Low Z mode)
  • High Impedance mode:
    • One Systems 8-inch woofer
  • High Impedance power taps:
    • 150W, 75W, 37W (70Vrms)
    • 150W, 75W (100Vrms)
    • NOTE: An active 4th order Butterworth high pass filter with a corner frequency
      of 43Hz should be used on all systems applications. This applies to both low
      impedance (Low Z mode) and 70V/100V operation (Hi Z mode).
  • For bi-amp operation the suggested filters are:
    • 4th order Butterworth high pass………43Hz
    • 4th order Linkwitz-Riley low pass……100Hz or higher

System Components:

  • Low Frequency:
    • ONE SYSTEMS 8” (1 each)
  • High Frequency:
    • N/A
  • Suspension/Mounting points:
    • 7 each M8
  • Weather Performance:
    • IEC 529 IP 45
    • Mil Spec 810
  • Dimensions (H x W x D):
    • 483.3 x 243.2 x 270.8 (19.05 x 9.56 x 10.66)
  • Net Weight:
    • 13 kg (29 lb)
  • Optional Accessories:
    • 108/HTH-U/M
    • PM3/M
    • PT38/M
    • Additional Supporting Systems: 108/HTC, 108/HTH, 104/HTH,
      and 106/HTH