Split Your Mic Signal With Ease
The JS2 is a professional microphone splitter designed to split a single source to multiple targets simultaneously without signal degradation or noise. A superior Jensen transformer inside provides galvanic isolation that eliminates ground loop noise and hum while maintaining a very wide bandwidth with very low distortion and phase shift. Ground jacks on the outputs further reduce noise, while the input pad also allows you to connect line-level sources. Both the JS2 and JS3 can be mounted to the frame for migration and setup, and the Radial J-Rak has up to eight slots.
Radial JS2 Features
- Send one microphone signal to three destinations simultaneously
- Jensen transformer-equipped for exceptional audio quality
- Eliminates hum and buzz caused by ground loops
- Single isolated output provides optimal noise rejection
- Input Connections:
- Input Impedance: 1.06 k ohms
- Insertion Loss: 0.8dB
- Voltage Gain: -0.82dB
- Frequency Response: 10Hz - 80kHz
- Total Harmonic Distortion (THD) : 0.05% or Less
- Max Input Sound Level (SPL): +2dBu
- Common Mode Rejection Ratio:
- 130dB (60Hz)
- 95dB (3kHz)
- Output Impedance: 245 ohms
- Connectors:
- 1 x 3-Pin XLR Female Input
- 1 x 3-Pin XLR Male Thru Output
- 1 x 3-Pin XLR Male Direct Output with Lift Switch
- 1 x 3-Pin XLR Male Isolated Output with Lift Switch
- Controls:
- 1 x -30dB Pad Switch
- 2 x Lift Switches
- Dimensions: 2 x 3.25 x 5" (51 x 83 x 127 mm)
- Weight: 1.95 lbs (0.9 kg)
Radial JS2 Downloads
Manual - As of 4/3/2023
Product documents are provided as a courtesy and may not reflect the most up-to-date information. Please contact us for the most up-to-date information.
