The TS-1D is intended to protect audio input and output circuits from the effects of transients induced on the audio lines.
- Immunity from Electrostatic Discharge
- Immunity from Induced Transient Voltage
- Immunity from RF Interference
- Immunity from Electromagnetic Pulse
- CE Compliance
AUDIO
- Frequency Response: 10 Hz to 50 kHz (+/- 0.25 dB)
- Insertion Loss: <0.3 dB (into balanced bridging input), <1.0 dB (into 150 ohmsor 600 ohmsbalanced< input), < 6 dB (600 ohmsbalanced source into 600 ohms load)
ELECTRICAL
- Number of Circuits: 4, independent (for connection as 4 unbalanced or 2 balanced audio lines)
- Equivalent Series Resistance, Input to Output: 20 ohms
- Equivalent Circuit: 300 kHz LP filter, 6 dB/octave, integral shunt high-voltage switch
- Maximum Working Signal: 30 Vp, 60 V p-p
- HV Switch Clamp: 24 V actuation; 48 V maximum
- Transient Energy: 0.1 joule
PHYSICAL
- Case Material: Electromagnetically inert plastic composition
- Size: 1.75 in. W x 2.5 in. L x 0.9 in. H (4.45 cm x 6.35 cm x 2.29 cm) (including terminal strip)
- Ground Bus (integral): 110 alloy copper, 0.25" W x 1.6" L (.64 cm x 4.1 cm) with 2 mounting holes, #6 (.37 cm) clearance, mounting hardware included
- Input/Output Termination: #6 (.35 cm) captive screw terminals
- Package Type: Cardboard Box
- Package Dimensions: 2 x 2 x 4 in.
- Shipping Weight: 0.245 lbs.
- WEEE weight: 0.185 lbs.
- Tariff code: 8518.40.2000
