Sennheiser EM2050 Wireless Dual Receiver

MSRP: $3,510.00
$2,800.00
(You save $710.00 )
SKU:
EM2050
old_prod_key:
9596C0FBBBFE430BADA2124DC888E63B

Equipped with the same features as Sennheiser EM 2000 but designed as a twin receiver, EM 2050 makes it possible for the RF signal to be looped through with the help of an integrated active splitter. With this design, you can set up systems with up to 16 channels without using external splitters. An integrated equalizer and guitar tuning device complete the package.

  • Rugged 19" all-metal housing with integrated power supply unit
  • Up to 3000 frequencies in up to 75 MHz switching bandwidth
  • 20 fixed frequency bands with up to 64 compatible presets
  • 6 banks each with up to 64 tunable channels
  • True diversity technology for best reception quality
  • Integrated antenna splitter for cascading up to 8 devices without using additional splitters
  • Pilot tone squelch for interference-free operation
  • Scan feature within the channel band system
  • Continuous scanning together with Sennheiser's Wireless Systems Manager
  • Frequency setting in 25 kHz steps
  • Squelch setting always visible on the display
  • Antenna cables for active antenna supply
  • Transformer-balanced audio outputs
  • HDX noise reduction system with signal-to-noise ratio less than 120 dB(A)
  • Ethernet for connecting to a PC
  • Monitoring and control using Sennheiser WSM PC software
  • User-friendly menu interface with two-color backlit graphic display (red as a warning)
  • Transmitters can be configured from the receiver menu
  • Transmitters can be synchronized over the infrared interface
  • 4 selectable equalizer presets
  • Soundcheck mode for monitoring transmission conditions
  • Adjustable headphone connection
  • Carrier frequencies max. 3000
  • Presets max. 64
  • Switching bandwidth max. 75 MHz
  • Peak deviation +/- 48 kHz
  • Squelch threshold Off, 5 ... 25 dBμV Can be set in 2 dB steps
  • Intermodulation spacing ≥ 75 dB
  • Antenna connector 2 BNC (50 OHM)
  • Cascadable 2 BNC (50 OHM)
  • Gain 0 dB +/-0,5 dB Based on antenna inputs
  • Compander HDX
  • Frequency response 25 ... 18000 Hz
  • Signal-to-noise ratio > 120 dB(A)
  • THD, total harmonic distortion < 0,9 %
  • Audio-XLR connector 2 x XLR-3 + 2 x 6,3 mm Jack
  • Audio output level (balanced) +18 dBu max Setting range: 49 dB in 1 dB steps + 6 dB gain reserve
  • Booster 12 V DC, 2 x 200 mA Short-circuit proof
  • Operating temperature -10 °C ... +55 °C
  • Power supply 100 - 240 V AC, 50/60 Hz
  • Current consumption max. 0,25 A
  • Dimensions (Receiver) 217 x 483 x 43 mm
  • Weight (Receiver) 2900 g
CONSUMER ALERT

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at http://www.fcc.gov/cgb/wirelessmicrophones/.

SENN2000COM

 
  • 1 EM 2050 stationary twin receiver
  • 3 mains cables (EU, UK, and US)
  • 2 rod antennas
  • 4 self-adhesive device feet
  • 1 instruction manual
  • 1 supplementary frequency sheet
  • 1 supplementary RF power sheet

FCC Consumer Alert

This disclosure informs consumers that wireless microphone users must cease any wireless microphone operations in the 600 MHz service band no later than July 13, 2020. In addition, in many instances they may be required to cease use of these devices earlier if their use has the potential to cause harmful interference to 600 MHz service licensees’ wireless operations in the band.

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website.