Priced individually but only sold in pairs!

Like the CMS 803DC, the DCQ is a full bandwidth, high sensitivity loudspeaker boasting exceptional articulation and class-leading sound. Leveraging TANNOY's extensive experience in in-ceiling loudspeaker design, this remarkable performance comes with practicality, flexibility and longevity as standard.

The new Dual Concentric driver design features revolutionary Omnimagnet technology and unique patent-pending Torus Ogive Waveguide device. Together these technologies provide more consistent and controlled directivity along with improved high frequency response. Improved time-alignment and greater coherence between LF and HF results in a wider sweet spot for enhanced performance both on and off-axis. The re-designed baffle provides a subtle extension to the waveguide effect for additional sonic benefits.

• Frequency Response (-3 dB) (1)
  • 47 Hz - 30 kHz

• Frequency Range (-10 dB) (1) BM back can model
  • 40 Hz - 35 kHz

• Frequency Range (-10 dB) (1) PI fitted with back can
  • 41 Hz - 35 kHz

• System Sensitivity (1 W @ 1 m) (2)
  • 93 dB (1 W = 4 V for 16 Ohms)

• Nominal Coverage Angle
  • 60 degrees conical

• Power Handling (3)
  • Average:
    • 90 W
  • Programme:
    • 180 W
  • Peak:
    • 360 W

• Recommended Amplifier Power
  • 180 W @ 16 Ohms

• Nominal Impedance (Lo,Z)
  • 16 Ohms

• Rated Maximum SPL
  • Average:
    • 113 dB
  • Peak:
    • 119 dB
  • With THP60 - Average:
    • 111 dB

• Transformer Taps (via front rotary switch)
  • 70 V: 60 W (83 O) / 30 W (165 O) / 15 W (330 O) / 7.5 W (660 O) / OFF & low impedance operation
  • 100 V: 60 W (165 O) / 30 W (330 O) / 15 W (660 O) / OFF & low impedance operation

• TRANSDUCERS
  
  • Dual Concentric point source driver
    • 1 x 200 mm (8.0”) Dual Concentric driver, using Omnimagnet technology
  • Low Frequency
    • 44 mm (1.75”) voice coil, treated multi fiber paper pulp cone
  • High Frequency
    • 25 mm (1.00”) PEI dome

• PHYSICAL
  
  • Enclosure Back Can:
    • Zinc plated steel
  • Baffle:
    • Reflex loaded UL 94V-0 rated ABS
  • Grille:
    • Steel, with weather resistant coating

• Safety Features
  • Safety ring located at rear of enclosure for load bearing safety bond

• Clamping Design
  • Security toggle clamp

• Cable Entry Options
  • Cable clamp & squeeze connector for conduit up to 22 mm

• Connectors
  • Removable locking connector with screw terminals with “loop through” facility

• Hole cutout diameter (all models)
  • 295 mm (11.61”)

• Dimensions
  • Bezel diameter:
    • 319.0 mm (12.56”)
  • Front of ceiling to rear of backcan:
    • 310.5 mm (12.22”)
  • Front of ceiling to top of safety loop:
    • 327.7 mm (12.90”)
  • Net Weight (ea)
    • 8.5 kg (18.74 lbs)

• Included Accessories
  • C Ring
  • Tile bridge
  • Paint mask
  • Cutout template
  • Grille

• Optional Accessories
  • Plaster (Mud) ring
  • Arco Grille

• Packed Quantity
  • 2

• Notes
  • Average over stated Bandwidth. Measured in an IEC baffle in an Anechoic Chamber
  • Unweighted Pink noise input, measured at 1m on axis
  • Long term power handling capacity as defined in EIA - 426B test