Tannoy 8001 7500 CMS 503ICT BM 5" Ceiling Speaker, Blind Mount Version

$259.00
No reviews yet Write a Review
SKU:
8001 7500
Minimum Purchase:
2 units
Shipping:
Calculated at Checkout
Availability:
This is a special order item, we may contact you regarding your order to confirm.
Stock Status:
This is a special order item, feel free to order, we will contact you with questions or issues.
Adding to cart… The item has been added
Add to Wishlist

Priced individually but only sold in pairs!

With a frequency range of 71 Hz-24 kHz (PI Backcan version), continuous program power handling of 100 Watts, sensitivity of 89 dB/Watt and 90 degree conical dispersion pattern the CMS 503ICT is ideal for small to medium sized rooms or installations requiring arrays of in-ceiling speakers to cover a large area.

The point source configuration of the TANNOY ICT driver's mid-bass and tweeter sections ensures a wide and controlled dispersion for optimum coverage and greater intelligibility. Use of wireless electromagnetic coupling to drive the tweeter means that no crossover is required, making the ICT drive unit exceptionally reliable and ideal for applications where constant heavy usage is anticipated. The mineral-loaded polypropylene cone material and nitrile rubber surround further enhance durability and long-term reliability.

 
  • Frequency Range (-10 dB) (1)
    • BM Backcan: 74 Hz - 24 kHz
    • PI Backcan: 71 Hz - 24 kHz
  • System Sensitivity (1W @1m) (2): 89 dB (1 W = 4 V for 16 Ohms)
  • Nominal Coverage Angle: 90 degrees conical
  • Coverage Angle (1 kHz to 6 kHz): 105 degrees
  • Directivity Factor (Q): 5.6 averaged 1 kHz to 6 kHz
  • Directivity Index (DI): 7.0 averaged 1 kHz to 6 kHz
  • Power Handling (3)
    • Average: 50 W
    • Programme: 100 W
    • Peak: 200 W
  • Recommended Amplifier Power: 100 W @ 16 ohms
  • Nominal Impedance (Lo,Z): 16 ohms
  • Rated Maximum SPL
    • Average: 106 dB
    • Peak: 112 dB
  • Transformer Taps (via front rotary switch)
    • 70 V: 30 W (165 O) / 15 W (330 O) / 7.5 W (660 O) / 3.75 W (1320 O) / OFF & low impedance operation
    • 100 V: 30 W (330 O) / 15 W (660 O) / 7.5 W (1320 O) / OFF & low impedance operation
  • Crossover
    • 7 kHz inductively coupled
  • TRANSDUCERS
    • Low Frequency: 130 mm (5.00”) mineral loaded polypropylene
    • High Frequency: ICT aluminium dome
  • PHYSICAL
    • Enclosure Backcan: Zinc plated steel
    • Baffle: Reflex loaded
    • UL 94V-0: rated ABS
    • Grille: Steel, with weather resistant coating
  • Safety Features: Safety ring located at rear of enclosure for load bearing safety bond
  • Clamping Design: Security toggle clamp
  • Backcan Options
    • Blind Mount (BM): Complete with fixed back can
    • Pre Install (PI): Separate backcan for pre-installation
  • Cable Entry Options: Cable clamp & squeeze connector for conduit up to 22 mm
  • Conduit Knockouts on PI Backcan: 3 Sets of horizontal positions 19 / 22 / 28 mm (0.75” / 0.87” / 1.10”)
  • Connectors: Removable locking connector with screw terminals with “loop through” facility
  • Compliance: UL-1480, UL-2043, CE
  • Dimensions
    • Bezel diameter: 205.9 mm (8.11")
    • BM Model: Front of ceiling to rear of backcan 188.5 mm (7.42")
    • BM Model: Front of ceiling to top of safety loop 205.8 mm (8.10")
    • PI Model: Front of ceiling surface to rear of speaker unit 131.8 mm (5.19")
    • PI Model: Front of accessory backcan bezel to top of safety loop 153.5 mm (6.04")
    • Hole cutout diameter: 190 mm (7.48”)
  • Net Weight (ea)
    • CMS 503ICT BM: 3.85 kg (8.49 lbs)
    • CMS 503ICT PI: 2.85 kg (6.28 lbs)
    • PI Backcan: 2.6 kg (5.73 lbs)
  • Optional Accessories
    • Plaster (Mud) ring
    • Arco Grille
  • Packed Quantity: 2
  • Notes
    • Average over stated Bandwidth. Measured in an IEC baffle in an Anechoic Chamber
    • Unweighted Pink noise input, measured at 1m on axis
    • Long term power handling capacity as defined in EIA - 426B test
       
 
 
  • C Ring
  • Tile bridge
  • Paint mask
  • Cutout template
  • Grille
 

You may also like