TOA A-5012 Four input BGM Mixer/Amp w/Network DSP- 120W @70V

MSRP: $641.00
$519.00
(You save $122.00 )
SKU:
A-5012
Shipping:
Free Shipping
old_prod_key:
554537C878D04DD8B3C23BFE6F68FCE6

The A-5006 is a half-rack 1-unit size 60 W desktop mixer power amplifier. Inputs 1 and 2 can be set for either MIC or LINE sound sources, and its output is compatible with both high-impedance (100 V and 70 V lines) and low-impedance (4 Ω) speaker connections.Functions can be set with a PC using the dedicated setting software. The A-5006 is ideal for use asa power amplifier in small commercial facilities and conference rooms.With the use of an optional rack mounting bracket, it can be mounted in an EIA Standard equipmentrack (1 unit size).

  • Power Source 100-240 V AC, 50/60 Hz
  • Rated Output 60 W
  • Power/Current Consumption 106 W (rated output), 20 W (based on cULus standards)
    Max. 2 A
  • Frequency Response 50 Hz - 20 kHz (1/8 rated output)
  • Distortion 1 % or less (1 kHz, rated output)
  • Input INPUT 1, 2: MIC -60 dB(*1)
    LINE -20 dB(*1) MIC/LINE selectable
    2.2 k ohms, electronically-balanced, removable terminal block (5 pins)
    INPUT 3, 4: LINE -20 dB(*1), 10 k ohms, unbalanced, RCA pin jack
  • Output SPEAKER: 4 ohms, 70 V (83 ohms), 100 V (170 ohms), removable terminal block (5 pins)
  • Signal to Noise Ratio MIC 1, 2: 50 dB or more
    LINE 1 - 4: 70 dB or more
    (A-weighted)
  • Function Parametric equalizer: 5 points settable on each input and output
    20 Hz - 20 kHz +/-15 dB
    Q: 0.267 - 69.249
    Compressor: ON/OFF settable on Inputs 1 and 2 (OFF by default)
    Threshold, Ratio, Attack time, Release time, and Gain are settable
    independently on each input.
  • Control Mute control, Remote master volume control, Power ON/OFF switch, Ground lift
  • LED Indicator Power indicator, Signal indicator, Peak indicator, Protect indicator
  • Network I/F 100BASE-TX
  • Operating Temperature 0 „ƒ to +40 „ƒ (32 ã‚œF to 104 ã‚œF)
  • Operating Humidity 35 % to 80 %RH (no condensation)
  • Finish Panel: PS resin, black
    Case: Surface-treated steel plate, black, paint
  • Dimensions 210 (W) × 52.5 (H) × 375 (D) mm (8.27 × 2.07" × 14.76")"
  • Weight 3.6 kg (7.94 lb)
  • Accessory CD (setting software) …1, Large type removable terminal plug (5 pins) …1, Small type removable terminal plug (5 pins) …2, Plain washer (*2) …6, Bracket mounting screw (M3 x 10) (*2) …6, Power supply cord (2 m (6.56 ft)) …1
  • Option Half width blank panel: MB-15B-BK (for rack mounting one A-5006 unit) (*2)
    Rack joint bracket: MB-15B-J (for rack mounting two A-5006 units) (*2)
    Rack runner: YA-706