The TSS-2470II is 360 Systems’ latest model of Broadcast Time Delay, bringing the ability to adjust the delay setting on-the-fly without loss of any currently recorded time. This gives it the flexibility to handle applications for Mountain Minute commercial insertion, schedule alterations and disaster recovery as well as simple set-and-forget time zone shifting.

The TSS-2470II offers the same basic features and built in reliability as the standard TSS-2470. With HD and SD compatibility, frame accurate delay, RAID 5 storage, redundant power and cooling and a space saving 1U chassis, the TSS-2470 maintains the quality and reliability customers expect from 360 Systems.

The simple user interface makes adjusting and readjusting the delay time easy. Establish an initial delay time in the primary delay window, then utilizing any of the four preset buttons or transport controls, change the delay as needed. Time zone differences can be easily compensated for without the need for manual recording and rebroadcasting. Simply enter the desired delay time and click run or reset the delay time without having to restart the delay. The input feed is automatically delayed the set amount of time without any further user inputs required.

The TSS-2470II supports all broadcast formats – 720p, 1080i and NTSC/PAL at frame rates of 29.97/59.94 or 25/50 Hz. Because the TSS-2470II transports high-value program content, it employs a four-drive, RAID 5 disk array for enhanced reliability. Drives and power supplies are hot swappable allowing the system to continue running without downtime.  With its 1U form factor, power consumption is low, and forced-air cooling extends component life and reliability.

The TSS-2470II can also be controlled remotely with 360 Systems' Remote Workstation software or with the use of GPIO triggers. Other features include high-quality 10 bit video with up to 16 channels of embedded audio and support for closed captions and other VANC data. A live feed monitor output and frame accurate delay from 30 seconds to 24 hours or more, round out an excellent standard feature set.

HDSDI, SDSDI compatibility
• Configurable for 29.97/59.94 or 25/50 fps operation
• Frame accurate delay from 30 sec. to 24 hrs.
• Closed caption / VANC data support
• High quality 10 bit video and 24 bit audio support
• Up to 16 channels of embedded audio
• Intuitive graphical interface
• Simple controls for setting delay times
• Standard transport controls
• Remote Workstation control
• RAID 5 protected storage
• Space saving 1U chassis design
• Redundant cooling and power
• Live feed monitor and delayed outputs
• Dependable Linux® based OS

• PRIMARY VIDEO
  
  • Channels
    1, selectable HD or  SD, with outputs for delayed program and monitor (input pass-thru)
  • Video Input
    HD-SDI, SMPTE 292M, or SD-SDI (SMPTE 259M)  HD-BNC Connector
  • Video Monitor Output
    HD-SDI, SMPTE 292M, or SD-SDI (SMPTE 259M)  HD-BNC Connector
  • Delayed Video Output
    HD-SDI, SMPTE 292M, or SD-SDI (SMPTE 259M)  HD-BNC Connector
  • Video Format
    1080i at 29.97 or 25 Hz; 720p at 59.94 or 50 fps; 525/60 NTSC; 625/50 PAL
  • Ancillary Data
    Passes, records and reproduces all VANC lines in HD formats.
  • Video Genlock
    Black burst, tri-level, HD-BNC Connector
  • Video Encoding
    HD AVC100, SD MPEG-2
  • Output Sync Reference
    Genlock or fail-over to Video Input
  • Drift, long term
    Zero frames

• VIDEO MONITOR OUTPUT
  
  • E-E Input Monitor
    HD-SDI, SD-SDI

• ANCILLARY DATA
  
  • Closed Captions
    HD – 608/708 in VANC; SD – Line 21 VBI

• AUDIO
  
  • Embedded Audio
    16 channels – SMPTE 299M
  • Sampling Frequency
    48 kHz

• STORAGE
  
  • Disk Storage System
    4 server-grade SATA drives in RAID-5 array
  • Maximum Delay Time
    > 24 hours HD (> 76 hours SD) Drive size options available extend to multi day delays
  • Delay Adjustment
    Via GUI in HH:MM:SS:FF to one-frame precision. Non-volatile
  • Drive Replacement
    Front access

• USER CONTROLS
  
  • System Control
    Graphical User Interface (GUI)
  • Remote Control
    Remote Workstation for PC
  • GPIO
    12 GPI and 12 GPO
  • Control Devices
    Keyboard and mouse (supplied), VGA video monitor (not supplied)
  • Time Delay Setting
    HH:MM:SS:FF on GUI        Minimum delay 30 seconds.
  • Unit shutdown
    Accessible with momentary switch through front panel or GUI

• DIAGNOSTIC
  
  • Fault Monitoring
    Front Panel LEDs: power, system, network
  • Error Log
    Diagnostic data downloadable through Ethernet connection

• MISCELLANEOUS
  
  • Mechanical
    1U Rack mount: 13/4” x 19” x 22” [45 x 483 x 559 mm]. Weight: 26 lb [12 Kg]
  • Power
    100-240 V, 50/60 Hz, 400 W, redundant power supply
  • Cooling
    Forced air; multiple fans
  • Software Upgrades
    USB Flash Memory
  • Operating System
    Linux®
  • Country of Origin
    Made in U.S.A.
    Specifications and availability are subject to change without notice.