The AMK PSA802-CFM powered speakers feature a 40 watt Class D digital design amplifier, with > 75% efficiency for the main speaker. These units are available as single master speakers or sets with an unpowered companion speaker (PSA802-CFM-P) The speaker combines high performance, power handling, and a very smooth response.
The loudspeaker driver, CX802, is one of the few transducers in the commercial sound industry that produces and meets the standards of recording studio. Excellent dispersion, wide bandwidth, and a smooth frequency response make this the top choice for today's overhead commercial applications.
There are wide ranges of the application for this unit, especially in educational markets and corporate boardrooms where direct input of the signal from the processor is desired (i.e., projectors, laptops, or any line level device)
- All metal construction, including baffle
- High performance 8" coaxial loudspeaker with wide dispersion
- Self powered with 40 watt Class D amplifier
- UL Listed (UL 1480, UL 2043) PK-213-8QM Enclosure
Speaker
- Frequency Response 55 Hz - 20 kHz
- Voice-coil diameter 1"
- Average Beamwidth @ 2 kHz 110 deg.
- Magnet Weight 20 oz
- Magnet Material Barium Ferrite
- Tweeter 13mm Polyamide Soft Dome
- Woofer Cone Polypropylene
- Surround Material Inverted Rubber
- Crossover Frequency 5.5 kHz
- Depth of the Enclosure 7 in.
- Diameter of the Grille 12.75 in.
- Enclosure Mounting Metal Swivel Clamp
Amplifier
- Amplification 40 watt Class D design amplifier
- Amplifier Efficiency > 75%
- Total Harmonic Distortion < 0.2%
- Signal to Noise Ratio >95dB
- Protection Protected as to short circuit to supply and ground, as well as minimum current
- Controls Input potentiometer level adjustment
