The ARC-5 broadcast radio console is the ultimate compact board. It is perfect for applications such as podcasting, production studios, on the road, as well as small broadcast or internet radio. It comes standard with two mics, stereo line input, USB and mix-minus to connect to your phone hybrid. It gives you all the essentials at a fraction of the cost.The ARC-5 radio console is compact and durable for professional Radio applications. The 0.059" steel chassis is extremely strong and well finished with a powder coat finish. The front panel graphics are on the reverse side of a beautiful polycarbonate overlay for scratch resistance and long life. The switches have LED lighted indicators to clearly display switch status. It is excellent for so many different applications, it would be foolish not to have on5 Channels - 6 Inputs. Analog Console. Affordable & Powerful.

 

• 5 Channels - with 5 channels and 6 inputs, you can connect all the essentials. 2 Line In inputs allows you to connect to CD players, mp3 players and other analog sources.
• Mic Channels - 2 mic channels with optional 48V phantom power.
• LED VU Meters - with accurate VU ballistics, for the Program bus.
• Built Tough - professional throughout. The 0.059" steel chassis is extremely strong and well finished with powder coat finish.
• No More RF - has balanced inputs & outputs for use in high RF environments.

1 Stereo output buses. Program with mono mixdown.
• Active balanced - All outputs & inputs are active balanced.
• Stereo or Mono - Both stereo & mono outputs for 1 output bus.
• Listen - Monitor & 1/8" Headphone output

4 types of Inputs. More options, more power. (STANDARD WITH ALL MODELS, unless otherwise noted)
• 2 Mic Channel - Two mic channels are included on the ARC-5 to support a Host and Guest talk show in the main control room itself. The channel Two mic can also be remoted to a separate announce booth if desired.
• Stereo Line level Channel - Channels 3-4 are stereo, line level input channels appropriate for source devices like CD players, MP3 players, network feeds, etc. Channel 3 has both an unbalanced -10dBu consumer level input on RCA connectors and a balanced +4dBu level input on an RJ45 connector. A source can be connected to either set of input connectors (not both). The unbalanced inputs are ideal for studios where the sources are located locally in the studio itself. The balanced inputs should be selected if some of these sources (such as a satellite feed) are originated in other studios where the wiring could be long and introduce hum & noise.
• PC-USB input Channel - The ARC-5 contains a built-in, Windows compatible, USB sound card on Channel 5B USB connection to a PC. Most Windows compatible audio software can play and record from the console.
• Telephone Channel - Channel 4 has a balanced +4dBu level input on an RJ45 connector. Any type of analog source can be used, but if a telephone hybrid is connected as the source to channel 4, then a special mix-minus bus output is provided to feed the external telephone hybrid. The mix-minus bus output to the hybid includes every channel on the Program bus EXCEPT for channel 4 so that there is no feedback to the caller. The mix minus output is a +4dBu balanced signal for connection to professional hybrids.
For off-line (not on air) communication with the caller, a 'Talk' button on channel one is provided. Push the 'Talk' button and the channel one mic will be fed to the caller and the callers audio will be fed to the Cue system. To place the caller on air, just push the red channel on button at the bottom of channel 4.
The telephone system in the ARC-5 does not include hybrid control logic so the telephone system is controlled from the front panel of the hybrid.

Phone line system. Connect your phone hybrid for a powerful phone system.
• Phone Channel - channel 4 is a dedicated telephone channel that easily connects to an external telephone hybrid.
• Talkback Cue System - the caller can talk to you through the Cue system while a Talkback button enables the Control Room mic to talk off-line to the caller.

USB input channel. Connect to any Windows PC or MAC for play & record.
• Use any software - Use any automation or production software to either play or record.
• Playback - play any audio from your PC onto the board and then over the air. Play YouTube clips or any audio from your PC or MAC.
• Recording - record audio coming from your board onto your PC or MAC with any production software.
• Easy Setup - connect with a simple USB cable.
• Start & Stop Automation - with our automation system, you may start & stop the automation system.

RJ45 Connections. Quick & easy install with RJ45 connections.
• World Standard - all IO is world standard RJ45.
• Quick Setup - as simple as plug and play.
• Premade wiring - optional cables are available for common connections such as XLR & RCA. Check the accessories section for more information.

Low Profile Design. Defining what attractive is.
• Modern & Timeless - The ARC-5 has a modern low profile & sleek design that is timeless.

110 or 220VAC. Autosensing international power supply.
• Autosensing - power supply autosenses between 110 & 220 VAC for domestic or international installations.