The length (14.53") of the AT8035 Line + Gradient Condenser Microphone is well-suited for ENG, outdoor recording and other specialized uses. The microphone is designed for video production and broadcast (ENG/EFP) audio acquisition. Suited for both boom & handheld use, it provides the narrow acceptance angle desirable for long-distance sound pickup, featuring excellent sound rejection from the sides and rear of mic and switchable low-frequency roll-off. It operates on battery or phantom power.
- Length is well-suited for ENG, outdoor recording and other specialized uses
- Designed for video production and broadcast (ENG/EFP) audio acquisition
- Provides the narrow acceptance angle desirable for long-distance sound pickup
- Excellent sound rejection from the sides and rear of mic
- Switchable low-frequency roll-off
- Operates on battery or phantom power
- RoHS compliant-free from all substances specified in the EU directive on hazardous substances
- ELEMENT Fixed-charge back plate, permanently polarized condenser
- POLAR PATTERN Line + gradient
- FREQUENCY RESPONSE 40-20,000 Hz
- LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
- OPEN CIRCUIT SENSITIVITY
- Phantom: -38 dB (12.5 mV) re 1V at 1 Pa
- Battery: -39 dB (11.2 mV) re 1V at 1 Pa
- IMPEDANCE
- Phantom: 250 ohms
- Battery: 300 ohms
- MAXIMUM INPUT SOUND LEVEL
- Phantom: 132 dB SPL, 1 kHz at 1% T.H.D.
- Battery: 120 dB SPL, 1 kHz at 1% T.H.D.
- DYNAMIC RANGE (typical)
- Phantom: 110 dB, 1 kHz at Max SPL
- Battery: 98 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO 72 dB, 1 kHz at 1 Pa
- PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical
- BATTERY TYPE 1.5V AA/UM3
- BATTERY CURRENT / LIFE 0.4 mA / 1200 hours typical (alkaline)
- SWITCH Flat, roll-off
- WEIGHT 170 g (6.0 oz)
- DIMENSIONS 369.0 mm (14.53") long, 21.0 mm (0.83") diameter
- OUTPUT CONNECTOR Integral 3-pin XLRM-type
- ACCESSORIES FURNISHED AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8132 windscreen; battery; protective carrying case
- AUDIO-TECHNICA CASE STYLE SG1
