The PLE-1P120-US and PLE-1P240-US are two high-power plug-and-play cost effective power amplifiers that deliver 120 and 240 Watts to constant voltage or 4 ohm loads. Built with premium quality and protections, they offer basic functionality at a budget price. The amplifiers offer straight 1 V and 70 V line in, and 25/70 V and 4 ohm outputs. They can extend the power of the PLE- series mixer-amplifiers or be combined with the PLE-10M2-US mixer, or work anywhere where more power on an existing 70 V line is needed or when a line level signal is provided.
- 120 power amplifier in a compact housing
- 1 V line level balanced input
- 70 V, 25 V, and 4 „¦ outputs
- 70 V input for slave operation on 70 V speaker line
- Temperature-controlled forced front to back ventilation (directly stackable)
- 24 VDC backup power with built-in charger
Power Supply
- Voltage 115 to 230 VAC +/-10%, 50/60 Hz
- Inrush Current 4.5/9 A (230/115 VAC)
- Power Consumption 380 VA
Battery
- Power Supply Voltage: 24 VDC +/-15%
- Current 5.5 A
- Charge Current 0.5 ADC
- Voltage Charge Float: 27.3 VDC
Power
- Max Power Consumption 227 W
- -6dB (Mains): 130 W
- Idle Mains: 12 W
- Maximum Power 24 V: 7 A (150 W)
- -6 dB (24 V): 4.4 A (194 W)
- Idle 24 V: 0.3 A (7 W)
Performance
- Rated Power 180 W / 120 W
- Power Reduction on Backup Power: -1 dB
- Frequency Response 50 Hz to 20 kHz (+1/-3 dB @ -10 dB ref. rated output)
- Distortion <1% @ rated output power, 1 kHz
Input
- Connector 1 3-pin Euro style, balanced
- Sensitivity 1 V
- Impedance 20 k„¦
- Connector 2 3-pin Euro style, balanced
- Sensitivity 70 V
- Impedance 300 k„¦
- Dynamic Range 100 dB
- CMRR Mic: >40 dB (50 Hz to 20 kHz)
- Loudspeaker Power Outputs 25 V and 70 V:
- Connector: Euro style pluggable screw terminals
- Loudspeaker output 4 „¦
- Connector: Euro style pluggable screw terminals, 31 V (120 W)
Environmental
- Operating Temperature 14 to 131°F (-10 to 55°C)
- Storage Temperature -40 to 158°F (-40 to 70°C)
- Relative Humidity <95%
- Acoustic Noise Levels Fan:
Certifications and Approvals
- EMC Certification Emission: According to EN 55103-1
- Immunity: According to EN 55103-2
Mechanical
- Mounting Stand-alone, 19.0" (482.6 mm) rack
- Dimensions (H x W x D) 3.93 x 16.92 x 10.62" (100.00 x 430.00 x 270.00 mm)
- Width: 19.0" (482.6 mm)
- Height: 2U
- Weight Approximately: 23.2 lb (10.5 kg)
In The Box:
- Power Cord
- 19" Mounting Bracket (a Set)
- Limited 3-Year Warranty