The FSII-BASE-II-5 is a base station for the wireless FreeSpeak II 1.9 GHz and 2.4 GHz
active transceiver antennas and beltpacks. The FSII-BASE-II has four 2-wire connections for
analog partyline connection, four 4-wire audio connections and four displays with soft keys.
Dedicated stage announce (SA) output and program audio input are provided.

• Routing and configuration of up to
  5 FSII beltpacks
•  Fiber transceiver connections,
  supports two fiber enabled FSII
  splitters
• Browser configuration client works
  on any device or PC
• Four 2-wire ports with call signal,
  auto nulling (supports Clear-Com
  and RTS)
•  Supports 2 transceivers natively
  and up to 10 transceivers via FSII
  active splitter
•  Multi-mode user interface has
  monitoring, setup and main station
  modes with assignable soft keys
•  Supports both 1.9 GHz and 2.4
  GHz FSII beltpacks on a single base
  station
•  Matrix and partyline configurations
  support up to 12 channels and/or
  groups
•  Easily upgrade to 25 beltpacks with
  the purchase of a software license

• Base-to-Beltpack Frequency Response: 100Hz - 7.1kHz
• No. of Beltpacks per Base Station: 5
• No. of Transceiver/ Antennas Supported by Base: 10
• No. of Active Transceiver Ports: 2, one port can remotely power up to 1
• FSII splitter or 1 FSII transceiver
• PC Programming Port: 2 LAN RJ45
• Relay Port: DB15, supports one relay assigned to the SA out
• Partyline A ,B,C,D (each): XLR-3F, on/off termination switch, Clear-Com
  and RTS compatible
• Partyline Power On/Off: A/B, C/D paired
• Partyline Output Voltage: 26 - 28VDC, 850mA per pair (A/B or C/D)
• Four-Wire/Matrix Connection: 4 RJ-45
• Program Input: XLR-3F, transformer isolated, line-level input
• Stage Announce Output: XLR-3M, transformer isolated, line-level output
• Front Panel Headset: 4-pin male and 5-pin female options
• Front Panel Displays: 4 OLED’s with encoders and assignable soft keys
• Front Panel Indicators: Antenna Status, Beltpack Status
• External Power Supply Connection: 12VDC
• Base Station Programming/Editing: Push-to-enter rotary encoder
• Dimensions
  1.75 x 19.0 x 10.2 in (HxWxD)
  (44 x 483 x 259 mm)
• Weight
  5.57 lbs (2.5 kg