For Large-Scale Communication
Clear-Com FreeSpeak II-BASE-II is a license-free radio base station operating in the 1.9 GHz and 2.4 GHz frequency bands, designed for large-scale communications in large-scale operations. This base station supports up to 25 beltpacks and 10 antennas. (You can connect two antennas directly to the base station, or you can connect up to ten antennas through two FSII-SPL splitters.) The base station has connectors for four party lines and four 4-wire connector, and a dedicated SA. output and dedicated program audio input.
The Clear-Com FreeSpeak II-BASE-II features a multi-mode user interface with monitor, setup and master station modes with assignable softkeys and a 4-pin XLR headset connector. To use a fiber optic connection to the FSII-SPL splitter, please select the appropriate SFP transceiver from HLI-MMFO or HLI-SMFO.
Note: SFP modules are mechanically compatible, but electrical performance may vary. Clear-Com can only support his SFP transceivers provided by Clear-Com that have been tested with Clear-Com products.
Clear-Com FSII-BASE-II Features
- Routing and configuration of up to 25 FSII beltpacks
- Browser-based configuration tool
- Four 2-wire ports with call signal, auto-nulling
- Four 4-wire ports with call signal
- One dry contact relays
- Multi-mode user interface with monitoring, setup and main station modes with assignable soft keys
- Dedicated front panel keys for remote mic kill, stage announce and all talk
- Supports both 1.9GHz and 2.4GHz FSII beltpacks on a single base station
- Matrix and partyline configurations support up to 12 channels and/or groups
- Technical:
- Base-to-Beltpack Frequency Response: 100 Hz – 7.1 kHz
- of Beltpacks per Base Station: 25
- of Transceiver/ Antennas Supported by Base: 10
- of Active Transceiver Ports: 2, one port can remotely power up to 1 FSII splitter or 1 FSII transceiver
- PC Programming Port: 2x LAN RJ45
- Relay Port: DB15, supports one relay assigned to the SA out
- Partyline A , B, C, D (each): XLR-3F, on/off termination switch, Clear-Com and RTS compatible
- Partyline Power On/Off: A/B, C/D paired
- Partyline Output Voltage: 26 – 28 VDC, 800 mA per pair (A/B or C/D)
- 4-Wire/Matrix Connection: 4x RJ-45
- Program Input: XLR-3F, transformer isolated, line-level input
- Stage Announce Output: XLR-3M, transformer isolated, line-level output
- Front Panel Headset: 4-pin male and 5-pin female options
- Front Panel Displays: 4 OLED's with encoders and assignable soft keys
- Front Panel Indicators: Antenna Status, Beltpack Status
- External Power Supply Connection: 12 VDC
- Base Station Programming/Editing: Push-to-enter rotary encoder
- Power:
- Input: 100-240 VAC, 1.4 A max
- Output: 12 VDC, 60 W, 5 A
- Current Draw: 12 V, 4 A max, 48 W max
- Physical:
- Dimensions (H x W x D): 1.75" x 19.0" x 10.2" (44 x 483 x 259mm)
- Weight: 5.57 lbs. (2.5 kg)
