With its rugged steel metal casing, the Electro-Voice RE27N/D Dynamic Studio Microphone can withstand the rigors of professional use.

The Electro-Voice RE27N/D is a professional-quality dynamic cardioid studio microphone designed for broadcast production announce and voice-over, high-quality recording and sound reinforcement applications. The RE27N/D utilizes a revolutionary neodymium-alloy magnet and a reinforced diaphragm dome, a combination offering increased sensitivity (up to 6-dB more output), undistorted output at high sound pressure levels and an extended high-frequency response. The exceptional sensitivity of the RE27N/D, excellent transient response and inherently low noise of the dynamic transducer, all combine to ensure a superior signal-to-noise ratio, easily comparable to the finest condenser cardioid microphones. to further reduce noise, a highly effective hum-bucking coil is used to attenuate hum from lighting and other sources. The RE27N/D-s continuously Variable-D- design reduces bassboosting -proximity effect-#157; to maintain a uniform low-frequency response, up-close or at a distance. Two easily operated bass roll-off switches, offering a sharp low-frequency cut at 200 Hz or a gentle roll-off, are available for special situations where bass attenuation is required. A third switch is available for reducing the high-frequency treble boost. The true, uniform cardioid polar pattern of the RE27N/D offers the greatest rejection at 180?ø off axis, insuring superior gain-beforefeedback. An integral blast and wind filter covers each acoustic opening on the RE27N/D, allowing -close-talk-#157; situations with no worry of -P-pop,-#157; breath sounds or excessive sibilance. Part of the filter also shock mounts the internal microphone transducer, reducing the transfer of vibration from external sources. This shock-mount system along with the extremely rugged exterior steel casing allows the RE27N/D to withstand all the rigors of professional use.

• Studio condenser performance from self-generating transducer
• Consummate announce microphone
• Ideal for sampling
• Switch-selected E.Q.
• Effective internal shock, pop and wind protection
• Exceptional sensitivity assures high signal-to-noise

• Generating Element: Dynamic N/DYM Magnet Structure
• Frequency Response: 45 - 20,000 Hz
• Polar Pattern: Cardioid
• Impedance: 150 ohms balanced
• Sensitivity, Open Circuit Voltage: 3.1 mV/pascal = 1 kHz
• Power Level, 1 kHz (0 dB = 1 mV/Pascal): -51 dB
• Hum Pickup Level, typical (60 Hz/ 1 millioersted field): -130 dBm
• Polarity: Pin 2 is positive referenced to Pin 3 with positive pressure on diaphragm
• Case Material: Steel
• Connector Type: 3-pin XLR
• Dimensions
  • Length: 216.7 mm (8.53 in.)
  • Widest Diameter: 54.4 mm (2.14 in.)
  • Body Diameter: 49.2 mm (1.94 in.)
• Finish: Satin nickel
• Net Weight: 709 g (1 lb, 9 oz)
• Shipping Weight: 1,446 g (3 lb, 3 oz)
• Accessories Furnished: 81715 stand clamp
• Optional Accessories: 309A shock-mounted stand adapter for use with floor stand or recording boom