The JBL VMA Series VMA260 is a cost-effective mixer/amplifier with low-impedance functionality (4Ω, 8Ω) and high-impedance 70V and 100V output. The VMA260 is designed with convenient and flexible features to be used by commercial integrators worldwide, ideal for emerging markets.
- 8 inputs, two 60W outputs
- Independent bass/treble controls on each output channel
- 100V and 70V output, or 4-ohm/8-ohm
- Works with JBL CSR-V wall controllers
- Balanced mic/line inputs; RCA (.775V) inputs
- Max Output Power per Channel: into 4 O or 8 O;1kHz, = 0.5% THD - 60W
- Insertion Loss: (70V & 100V outputs) 1dB maximum
- Number of Inputs: 8
- Number of Outputs: 2
- Tone Controls: (Bass and Treble non-detented potentiometers on each channel) Bass +/-14dB @ 50Hz; Treble +/-14dB @10kHz
- Input Sensitivity: (to obtain full rated powerinto 8 O load) Mic Input: 5.5mVRMS Line Input: 1.3VRMS RCA Input (stereo in): 130mVRMS
- Frequency Response: (measured at 2.83VRMS into rated load impedance at any output) 4/8 O Output: 20Hz - 20kHz, +/-2dB;70V/100V Outputs: 80Hz - 15kHz +/-3dB
- Total Harmonic Distortion (THD): (measured at 2.83VRMS into rated load impedance at any output) Power Amp Output: < 0.5%,20Hz - 20kHz
- Signal to Noise Ratio: (Ref. Rated Power, mixer levels @ min., master volume @ max. A-weighted) >76dB
- Input Impedance: (nominal) Mic: 400 O Line: 20 kO (balanced) RCA: 50 kO
- Phantom Power: 27VDC
- Crosstalk: (reference rated power, volume at mid position, 1kHz) -70 dB
- Nominal AC Line Voltages: 100V, 120V, 220V,220-240V, 50/60 Hz
- Minimum Load Impedance: (Low Impedance Output, 70VOutput, 100V Output) 4 O, 80 O, 160 O
- Operating Temperature/Humidity: 0°C to 35°C @ 95% R.H. (non-condensing)
- Storage Temperature: -20°C to 85°C
- Net Weight: 25.5 lb (11.6 kg)
- Dimensions (WxDxH): 17.0" x 16.3" x 3.5" (432 x 415 x 88 mm)
