Nicom NT 150/LCD 150-Watt Programmable FM Exciter/Transmitter

Phase Locked Loop 150W Front-Panel Programmable FM Exciter/Transmitter with LCD display.87.5 - 108 MHz Range.

Includes low pass/harmonic filter and can be used as a stand-alone transmitter
Instant front panel programmability in 10 kHz increments
All functions via LCD password protected
Adjustable power output from 5 to 150 W with automatic power control
Remote control features (optional) include: power on/off, fwd & ref power metering, ability to change frequency and Internal temperature metering
Telemetry Output and FSK-ID Keyer (optional)
FCC and IC Certified

Rated Output Power: 5-150 W continuously variable (ALC)
RF Output Connector: "N" type female
RF Output Impedance: 50 ohm
Frequency Range: 87.5 MHz to 108 MHz
Frequency Programmability: direct from front panel in 10 kHz increments
Frequency Stability: better than 5 ppm (+/- 500 Hz)
Modulation Type: direct carrier frequency modulation
Spurious & Harmonic Suppression: < - 80 dB or better
Stereo Separation 55 dB @ 1 Khz
Distortion < 0.1 % (typ. 0.06 %) @ 1 Khz
Asynchronous AM S/N Ratio: 65 dB below reference carrier with 100% amplitude modulation at 400 Hz without de-emphasis, no FM modulation present
Synchronous AM S/N Ratio: 60 dB or better below reference carrier with 100% amplitude modulation at 400 Hz, without de-emphasis, FM modulation = +/-75 kHz at 400 Hz
AC Power Requirement: 117 or 230 V, +/-10%, 50-60 Hz, single phase internally switchable
Power Consumption: approx. 280 W from AC
Panel Size: 483 mm (19") W x 88 mm (3") H (2 standard rack spaces high)
Overall Depth: 410 mm (16")
Weight: 10 Kg (22 Lbs)
Ambient Temperature Range: 0° to 50° C (32° to 122° F)
Pre-emphasis: for FCC 75 μsec; for CCIR 50 μsec internally selectable

Composite Inputs: four total, 1 for MPX and 3 for SCA
MPX Input: 1 unbalanced BNC connector
MPX Input Impedance: 2k ohm
MPX Input Level: 3.5 Vp-p (1.237 Vrms/3.64 dBm)
Composite FM unweighed S/N ratio: >68 dB below +/-75 kHz deviation at 400 Hz measured in a 30 Hz to 100 kHz bandwidth with 75 μsec de-emphasis (RMS)
Composite Total Harmonic Distortion: 0.05% typical
Composite Intermodulation Distortion: 0.05%, measured with a 1 kHz and a 1.3 kHz tone, 1:1 ratio, at 100% modulation
Baseband: 30 Hz - 60 Khz within 0.15 dB
Crosstalk: main to stereo subchannel and stereo subchannel to main >55 dB (60 dB typical)
SCA Inputs: 3 unbalanced BNC connectors
SCA Input Impedance: 10k ohm
SCA Input Levels: 0 dBm (775 mVrms/2.2 Vp-p) nominal for +/-7.5 kHz deviation, adjustable
SCA Amplitude Response: +/-0.8 dB, 40 kHz to 100 kHz
Crosstalk: 67 kHz SCA to main or to stereo subchannel >65 dB
Crosstalk: 92 kHz SCA to main or to stereo subchannel >70 dB

Audio Input Impedance: 600 ohm balanced or unbalanced; 50 dB common mode suppression
Audio Input Level: 0 dBm (775 mVrms/2.2 Vp-p) for +/-75 kHz, adjustable
FM S/N Ratio: >70 dB below +/-75 kHz, deviation at 400 Hz measured in a 30 Hz to 20 kHz bandwidth with 75 μsec de-emphasis (RMS)
Audio Frequency Response: +/-0.8 dB, 30 Hz to 15 kHz
lntermodulation Distortion: 0.05% or less, measured with a 1 kHz and a 1.3 kHz tone, 1:1 ratio, at 100% modulation