The CB2 BaseStation establishes the wireless connectivity while also providing external connections to common established intercom systems. As a system, together with the Radio Packs, the BaseStation provides up to two communication channels.
- Each CB2 BaseStation supports up to 6 Radio Packs
- Easy-to-use interface with large informative backlit display and clearly laid out quick-access controls
- 2-Wire and 4-Wire intercom connections
- Front panel USB ports for Radio Pack pairing and firmware updates
- Front panel headset monitor station
- Stage announce audio output and relay
- AUX In/Out for program input and intercom audio output
- External 2 dB omni-directional antenna
- Sync input to receive sync from another CB2 BaseStation or CrewCom system. Sync port can link audio between two CB2 BaseStations.
- RF Frequency: 902-928 MHz
- RF Scheme: FHSS with TDMA
- Effective Radiated Power: 400 mW (+26 dBm)
- Radio Certification: FCCID: HSW-CCT900 and IC: 4492A-CCT900
- Transmission Range: 200m (approx. 650 ft) under typical conditions; 600m (approx. 1950 ft) line of sight. Note: Functional range depends on variables, including RF signal absorption, reflection, and external interference.
- Hardwired Intercom Audio Channels: 2
- Active Radio Packs Supported: 6
- Paired Radio Packs Supported (per CB2): 6
- USB Ports: 1 USB Type A; 1 Micro USB
- Front Panel LCD Display: 512x128 resolution
- Stage Announce and Relay: 1 Relay via Phoenix Conn
- Sync Port (supports one connection): 1 RJ-45 for copper
- 2-Wire Intercom Connection: 2 Channels via XLR 3F with XLR 3M loop (2 ports)
- 2-Wire Compatibility: Clear-Com, RTS, and AudioCom (Balanced)
- 4-Wire Intercom Connection: 2 Channels via RJ-45
- Stage Announce output: XLR 3M, balanced, transformer isolated
- Aux in: 1/4 in, 3 conductor jack, 17.5 dBu max in (nominal line level +5 dBu), balanced, transformer isolated
- Aux out: 1/4 in, 3 conductor jack, 17.2 dBu into 600 ohms (nominal line level +5 dBu), balanced, transformer isolated
- Power Input/Connector: 2.5 x 5.5 x 8mm, 14 VDC, 1.2 A
- Dimensions (L x W x H): 1RU 19x1.73x11.68 in.
- Weight: 5.9lb
- Operating Environment: -4 degrees to 122 degrees F; 10% to 90% humidity
- Max Sync Line Length: CAT 5e (or greater) 330ft.
- Max Altitude: 6,562 ft.
- RoHs Compliant: Yes
- Number of Antenna Connections per CB2: 1
- Antenna Connector Type: RP-TNC
- Supplied Antenna: +2 dBi Omni-directional (whip)
