Split Your Signal to Three Destinations
The JS3 is a professional microphone splitter designed to split a single source to multiple targets simultaneously without signal degradation or noise. A superior Jensen transformer inside provides galvanic isolation that eliminates ground loop noise and hum while maintaining a very wide bandwidth with very low distortion and phase shift. Ground jacks on the outputs further reduce noise, while the input pad also allows you to connect line-level sources. Both the JS2 and JS3 can be mounted to the frame for migration and setup, and the Radial J-Rak has up to eight mounts.
Radial JS3 Features
- Send one microphone signal to three destinations simultaneously
- Jensen transformer-equipped for exceptional audio quality
- Eliminates hum and buzz caused by ground loops
- Dual isolated outputs provide optimal noise rejection
- Input Impedance: 578 ohms
- Insertion Loss: 1.2dB
- Voltage Gain: -1.2dB
- Frequency Response: 10Hz - 80kHz
- Total Harmonic Distortion (THD): 0.05% or Less
- Max Input Sound Level (SPL): +2dBu
- Common Mode Rejection Ratio:
- 130dB (60Hz)
- 96dB (3kHz)
- Output Impedance: 254 ohms
- Connectors:
- 1 x 3-Pin XLR Female Input
- 1 x 3-Pin XLR Male "Thru" Direct Output
- 2 x 3-Pin XLR Male Isolated Direct Outputs with Lift Switches
- Controls:
- 1 x -30dB Pad Switch
- 2 x Lift Switches
- Dimensions: 2 x 3.25 x 5" (51 x 83 x 127 mm)
- Weight: 1.95 lbs (0.9 kg)
Radial JS3 Downloads
Manual - As of 4/3/2023
Product documents are provided as a courtesy and may not reflect the most up-to-date information. Please contact us for the most up-to-date information.
