Exceptonal Audio Quality to Split Three Ways
The LX-3 uses a high quality Jensen transformer to utilize the industry's best combination of frequency response, signal level handling and low distortion, delivering the best possible signal quality. It has two isolated outputs to eliminate hum and hum from ground loops and a third direct output. All three XLR outputs have ground switches for additional noise reduction, and a switchable -12dB input pad lets you connect even the hottest line outputs without fear of overload or distortion. The LX-3's input is accessed via an XLR/TRS combination that allows connection via balanced or unbalanced cables; The LX-3 automatically balances the signal of the separate outputs, preventing interference and signal degradation with long cables.</p.
Radial LX-3 Features
- Send one audio signal to three destinations simultaneously
- Jensen transformer-equipped for exceptional audio quality
- Eliminates hum and buzz caused by ground loops
- Combo jack input for 1/4" TRS or XLR sources
- Circuit: Passive (transformer-based)
- Frequency Response: 20 Hz - 20 kHz (±0.5 dB)
- Gain: -1.5 dBu
- Noise Floor: -120 dBu
- Maximum Input Level: +20 dBu
- Dynamic Range: 140 dBu
- THD: <0.001% @ 1 kHz
- Phase Deviation: +0.6 degrees @ 20 kHz
- Common Mode Rejection: 105 dB @ 60 Hz, 70 dB @ 3 kHz
- Inputs: 1 x XLR and 1/4" combo jack
- Outputs: 3 x XLR
- Input Pad: -12 dB
- Impedance:
- 712 Ohms (input)
- 112 Ohms (output)
- Transformer: Jensen JT-123-FLPCH
- Enclosure Material: 14-gauge steel
- Dimensions: 3.3 x 5.0 x 1.9" / 84.0 x 127.0 x 48.0 mm
- Weight: 1.5 lb / 0.7 kg
Radial LX-3 Downloads
Manual - As of 4/3/2023
Product documents are provided as a courtesy and may not reflect the most up-to-date information. Please contact us for the most up-to-date information.