Mix Two Balanced Mic or Line-Level Signals Into One
The Radial Engineering Mix 2:1 is a passive mixer that combines two audio signals into one mono output. It has separate inputs to balance the two signals if one is louder than the other and a polarity switch input 2 if one of the signals is out of phase. The unit accepts balanced 1/4" and XLR inputs, delivering a single XLR output.
Each input can be turned on or off. That way you can listen to both signals before you decide to combine them. Both level controls can be replaced at any time thanks to a switch on the front panel. If you hear buzzing or buzzing from the ground loops, a ground switch is included to alleviate the problem. The 2:1 Mix is completely passive, requires no power to operate, and features military-grade RFI-shielded circuitry and a durable 14-gauge steel chassis.
Radial MIX 2:1 Features
- Mix two channels to a single mono output
- Individual level controls can be bypassed when not in use
- Balanced 1/4" TRS and XLR inputs
- Completely passive, no need for power
- Audio circuit type: Passive mixer
- Frequency response: 20Hz to 20kHz
- Dynamic range: >133dB
- Total harmonic distortion: >0.005% @ 0dBu
- Intermodulation Distortion: >0.002% @ 0dBu
- Phase Deviation: 0° @ 20Hz, 0° @ 1kHz, +2° @10kHz
- Input Impedance: 8 kΩ
- Output Impedance: 1 kΩ
- Common Mode Rejection Ratio: >80dB
- Noise Floor: -113dBu
- Maximum Input: >+ 20dBu
- 180° polarity reverse, Ground lift, Level Control
- Input Connectors: 1/4", XLR
- Output Connectors: XLR
- Construction: 14-gauge steel chassis and outer shell
- Size (L x W x D): 5" x 3.25" x 1.85" (12.7 x 8.3 x 4.7cm)
- Weight: 48lb (0.67kg)
- Power: Passive, no power required
Radial Mix 2:1 Downloads
Manual - As of 4/3/2023
Product documents are provided as a courtesy and may not reflect the most up-to-date information. Please contact us for the most up-to-date information.
