Complete Backing Track Solution
If you need to use a backing track on stage and want to avoid audio issues and dropouts, Radial Engineering's SW8-USB is the audio device of choice. An 8ch switcher and USB interface for live use.
SW8-USB has his two USB ports for two different computers. Backing tracks from the primary device can be synchronized with redundant backing tracks from the secondary device. If something goes wrong, your device can automatically switch from one computer to another. Switching can be done manually via the front panel of the device or using a footswitch (sold separately).
SW8-USB provides multiple analog outputs via 8 XLR sockets, 8 1/4" connectors and 1 DB25 connector. Use these to feed and monitor mixes in your house. The 1/4" jack and DB25 connector are wired in parallel to feed multiple destinations.
The SWB-USB digital path can run up to 24 bits and 192 kHz. It comes with redundant auto-switching power supplies so it never goes down.
Radial SW8-USB Features
- Switch between redundant playback systems
- Two USB inputs eliminates the need for additional audio interfaces
- Manual or seamless automatic switching
- Line level or transformer-isolated mic level outputs
- Synchronize both playback systems using MTC
- Transformer: Eclipse ET-DB2
- Frequency response: 20hz-20Khz (+0.0dB/-0.5dB)
- Dynamic range: (XLR Outputs) 120dB (Monitor Outputs) 120dB
- Total harmonic distortion: (XLR Line Level Outputs) 0.006% @ 1Khz +18dBu (XLR Mic Level Outputs) 0.009% @ 1Khz +18dBu (Monitor Outputs) 0.006% @ +18dBu
- Intermodulation Distortion: (XLR Outputs) 0.0002% @ +18dBu (Monitor Outputs) 0.0002% @ +18dBu
- Output Impedance: (XLR Outputs) 150 Ohms (Monitor Outputs) 150 Ohms
- Common Mode Rejection Ratio: (XLR Line Level Outputs) -98dB (XLR Mic Level Outputs) -90dB (Monitor Outputs) -98dB
- Noise: (XLR Outputs) -120dB (Monitor Outputs) -120dB
- Switch-Over Noise: -90dBu
- Supported Sample Rates: 44.1, 48, 88.2, 96, 176.4, 192
- Bit Depth:16bit, 24bit
- D/A Latency: 7.4ms @ 96kHz, 4.6ms @ 192kHz
- Switch-Over Latency: 3ms (when using Tone via SPDIF)
- Maximum Output: (XLR Outputs) +18dBu @ 0DBFS (Monitor Outputs) +18dBu @ 0DBFS
- Ground lift, Remote Footswitch
- Input Connectors: 2 x Type-B USB 2.0
- Output Connectors: XLR-F, TRS, DB25
- Extras: MIDI I/O, Dual Power Supply, Remote Footswitch (optional)
- Size (L x W x D): 5"x 6"x 1.75" (44.5 cm x 15.25 cm x 4.5 cm)
- Weight: 2lb (4.2kg)
- Power: 100V to 240V, locking 4-pin XLR
Radial SW8-USB Downloads
Manual - As of 4/11/2023
Product documents are provided as a courtesy and may not reflect the most up-to-date information. Please contact us for the most up-to-date information.