The FP-SPR1 is the ideal product for applications requiring either conversion between SPDIF connector types or recovery of low SPDIF signal levels. Power connections are made using either the full-size barrier block terminals or a dc power jack located in one end panel. A second dc power jack is provided on the other end panel for connecting additional FLAT-PAK modules.
The FP-SPR1 is a single-channel module featuring three separate inputs. An input is provided in each conventional SPDIF format: BNC, phono and optical. Any one of these inputs may be used. A coaxial input has priority over the optical input. Three output jacks are also provided: BNC, phono and optical. Either of the coaxial jacks may be used and/or the optical output may be connected. It is possible to use only one of the three outputs or use one coaxial and the optical output simultaneously. A front-panel SIGNAL LED illuminates when an input signal of sufficient amplitude is received to produce the correct output from the module.
- Correct SPDIF Signal Level from Long Line
- Conversion Between SPDIF Connector Types
- BNC, Phono and Optical Inputs
- BNC, Phono and Optical Outputs
- Reshape SPDIF Waveforms
- Virtually Jitter-Free Performance
- Convenience of RDL FLAT-PAKs
- Inputs (3):75 ohms BNC coaxial, 75 ohms phono coaxial, optical
- Input Level:100 mV to 2.5 V p-p (coaxial)
- Outputs (3):75 ohms BNC coaxial, 75 ohms phono coaxial, optical
- Output Level:500 mV p-p (coaxial)
- Frequency Range:28 kHz to 48 kHz
- Indicator (1):Signal present LED
- Jitter:< 200 pS (input signal 200 mV p-p or greater),
- < 1 nS (input signal 100 mV p-p)
- Ambient Operating Environment:-10° C to 55° C
- Power Requirement: GROUND-REFERENCED, 24 Vdc @ 80 mA Note: May operate from 12 Vdc in standalone installations
- Dimensions:Height: 1.34 in. 3.40 cm; Width: 3.25 in. 8.26 cm; Length: 2.82 in. 7.16 cm
- Package Type:Cardboard Box
- Package Dimensions:3.625 x 4.625 x 2.125 in.
- Shipping Weight:0.55 lbs.
- WEEE weight:0.375 lbs.
- Tariff code:8518.40.2000
