The RU-MLB2 interfaces modules are compatible audio products Dante network with microphones and audio equipment with line level inputs and outputs. They are designed to be mounted in equipment cabinets, closets, on conference tables or panels and shelves in commercial / industrial installations.
The superior specifications RU-MLB2 make it ideal for the most demanding installations, and the most economic among commercial audio systems network.
The RU-MLB2 is built in a metal box, durable and perfect to operate alone, mounted on a surface or in a cabinet. This full-featured product is designed and manufactured in the USA for continuous use in demanding installations. Built to last. Built to excel.
- Two interface inputs to two outputs Dante Dante
- Two sources becomes Standard Audio Microphone or Line to Dante Red Channels
- Each input can select Microphone or Line
- It requires no gain settings for the user or installer
- Automatic gain microphone Condenser Mic 40 dB and 60 dB for Mic Dynamic
- Each comes with P48 Phantom Mic
- Inputs accept line level signals -10dBV Unbalanced or +4 dBu with> 18 dB Maximum Limit
- Front Panel LED signal for each audio input
- Two converts audio signals Dante Red Line Level Balanced
- Line level outputs Provide +4 dBu with> 18 dB Maximum Limit
- Audio Signal LEDs indicate for each of the Channels Network Signal Received
- Analog to Digital Conversion and Digital to Analog High Resolution 24 Bit
- Analog Recognized RDL filtration Outstanding Performance Increases
- LED status indicators Network Deploy Synchronized
- Operation Normal or Ready-to-moment from PoE (Model RU-MLB2P)
- Equipped for mounting in cabinet or on surfaces
- Network Connector:With RJ45 Link and Speed ‹‹indicators
- Digital Audio Ethernet Protocol:Dante
- Transmission Rate: 100 Mbps
- Sample Rates Supported:44.1 kHz, 48 kHz (default)
- Bit Depth Supported:24 bits
- Audio Operating Levels:-18 DBFS = +4 dBu
- Mic / Line Inputs to Network Interface Section
- Mic Inputs
- Inputs (2):Balanced, detachable terminal block
- Gain:Automatic; 40 dB for condenser mics, 60 dB for dynamique mics
- Input Level +4 dBu for:-56 DBu (dynamique), -36 dBu maximum; -36 DBu (condenser), -19 dBu maximum (sans saturation), -14 dBu maximum (soft clipped)
- Input Impedance:> 1 kW
- Phantom Power:P48, 48 Vdc
- Standard for Phantom:IEC 61938: 2013
- Frequency Response:20 Hz to 20 kHz (+/- 0.5 dB)
- THD + N:<0.1%
- Noise below +4 dBu:
- CMRR:> 70 dB (50 to 120 Hz)
- Crosstalk:
- Line Inputs
- Inputs (4):Balanced, detachable terminal block (2); Unbalanced, detachable terminal block (2)
- Input Level +4 dBu for:+4 DBu (balanced); -10 DBV (unbalanced)
- Input Impedance:> 20 KQ
- Frequency Response:20 Hz to 20 kHz (+/- 0.5 dB)
- THD + N:<0.1%
- Noise below +4 dBu:
- CMRR:> 60 dB (50 Hz to 120 Hz)
- Crosstalk:
- Headroom above +4 dBu:> 18dB
- Network to Line Level Interface Section
- Outputs (2):Balanced, detachable terminal block
- Output Level:+4 DBu (nominal)
- Output Impedance:150 ohms balanced; 75 ohms unbalanced
- Frequency Response:20 Hz to 20 kHz (+/- 0.5 dB)
- THD + N:<0.05%
- Noise below +4 dBu:
- Crosstalk:
- Headroom above +4 dBu:> 18dB
- Selectors (2):MIC or LINE (rear panel)
- Indicators (9):Power In (1); Output Signal LEDs (2); Signal input LED (2); Network Sys and Sync (2), Ethernet Link and Speed ‹‹(2)
- Power Connections (2):Power Jack; Detachable Terminal Block
- Ambient Operating Environment:0 ° C to 40 ° C
- Power Requirement:175 mA @ 24 Vdc phantom loads connected plus, or PoE (RU-MLB2P)
- PoE (RU-MLB2P):Class 0, IEEE 802.3af
- Dimensions:5.8 "(15 cm) W; 1.7" (4.3 cm) H; 5.2 "(13.2 cm) D
- Package Type:Cardboard Box
- Package Dimensions:6 x 6 x 2.625 in.
- Shipping Weight:1,774 lbs. (RU-MLB2); 1,799 lbs. (RU-MLB2P)
- WEEE weight:1,514 lbs. (RU-MLB2); 1,539 lbs. (RU-MLB2P)
- Tariff code:8517.18.0050
