The RU‑VA2 is the optimum choice where connectorized, rack‑mounted video attenuation is needed. This unit features two separate, passive isolated channels. A single input jack is provided for each attenuator. The output jack is intended to be connected to a 75 Ω terminated load. A front‑panel knob is provided to adjust hot video levels down to the normal 1 volt p‑p signal level. A single attenuator is capable of adjusting down the video level to half the incoming signal level.
In situations where excessive video levels may cause input overload artifacts, the RU‑VA2 is easily connected to the circuit and adjusted for proper video levels. With the high density 1/3 rack width of the RACK‑UP® series, an RU‑VA2 can be conveniently added to a rack so it is available when needed.
Power supply is required. Not included; order separately.
- Video Attenuation
- Two Channels
- Front-Panel Level Adjustment
- Stand Alone or Rack-Mountable
- 75 ohms Attenuators
- 1/3 Rack, High-Density Rack Mounting
- Mounting: Rack-mount using optional RU-RA3 triple rack mount or RC-1U rack chassis. Bottom mount using available adhesive strips; bottom or top mount to a flat surface using optional MB-2 mounting bracket set; front mount to a panel or backboard using optional MB-1 mounting set. Mount to cabinet using RU-BR1.
- Power Requirement: Passive (not required)
- Ambient Operating Environment: -20° C to 60° C
