RDL TX-PD8X 24 Vdc Switching Power Supply Distributor - 1x8

Product Price MSRP: $214.76
$161.07
(You save $53.69 )
No reviews yet Write a Review
SKU:
TX-PD8X
Shipping:
Calculated at Checkout
Availability:
This product will ship directly from the manufacturer, please allow an extra day or two for processing.
Stock Status:
Usually ships quickly from Manufacturer
Adding to cart… The item has been added
Add to Wishlist

The TX-PD8X is the ideal choice where power distribution from a current-limited switching power supply is needed. It is suitable for powering up to eight modules from a single power supply. The current limiting circuitry in many switching power supplies will cause the supply to shut down upon power-up when a high current capacitive load is connected. Upon application of power, the TX-PD8X ramps the voltage up, charging any load capacitance as quickly as possible, then switching full voltage to the load. If reverse polarity is connected to the input, the TX-PD8X disconnects the load until the condition is corrected.

In system design, various modules are frequently operated from a single power supply. Good engineering practice requires that the power wiring to each module originate at the power supply output. The TX-PD8X serves as the power source for each of eight modules. The TX-PD8X normally provides power to ground-referenced modules. A front-panel switch permits the installer to enable external control. When the ON terminal is connected to ground, the TX-PD8X outputs are active. External control is possible using RDL detection or control modules, open-collector outputs from OEM equipment or controllers, or using a D-RT2 RDL remote wall control. The front-panel blue LED remains illuminated when the outputs are active.

  • Distribution of 24 Vdc Power
  • Soft-Start from Switching Supply
  • Outputs may be Activated by an External Switch
  • Outputs may be Activated by an Open-Collector closure to ground
  • Directly Controllable by RDL Remote Controls
  • Up to 8 Power Distribution Points
  • Voltage Presence Indication
  • Reverse Voltage Protection
  • Input/Output Voltage: 24 Vdc @ 2 A (Intended for use with current limited switching supply)
  • Outputs (8): Total load current must not exceed 2 A
  • Indicator: POWER LED
  • Ambient Operating Environment: 0° C to 55° C
  • Power Requirement: 24 Vdc @ 25 mA plus connected loads
  • Package Type: Cardboard Box
  • Package Dimensions: 2 x 2 x 4 in.
  • Shipping Weight: 0.186 lbs.
  • Tariff code: 8518.29.0000

You may also like