Sandies MX14EW 14-Channel Broadcast Console with 36" Wide Frame

Info

Dynamax MX Seriesmodularon-air consoles have earned a reputation for user-friendliness and reliability throughout the world. The true modular design means all active components are housed right on each interchangeable module - not on the input motherboard. MX Series consoles can be short loaded to you requirements and new modules can be added later. Ease of installation, simplified operation and qualitysteelconstruction allows broadcasters to enjoy years of hassle free operation. Reverse screened Lexan overlays last far longer than paint and silk screen construction. True use of Voltage Controlled Amplifiers (VCA’s) eliminates scratchy audio caused by aging input fader and level control pots. Best of all, the fully modular channels can be quickly removed or replaced without shutting down console operations.

14 channel configuration
36 inch wide frame
Two Stereo and two Mono Output Buss
Metering for all 4 Output Buss
2 4X1 auxiliary inputs
Mic preamp on first two channels (available on all channels)
Full independent remote start features as well as remote On/Off
Independent A and B input level adjust
Full Monitoring, Headphone and Cue functions
Low noise VCA operation
Solid steel construction

Output:

Output Impedances:
- Line, 200 ohm
- Phones, 10 ohm
Output Level:
- Line, -10 to +10 dBu (+24 dBu maximum)
- Cue, 12 watts into built-in 8 ohm speaker
- Phones, 2 watts/channel into 8 ohm
Frequency Response:
- Line, 20 - 20 kHz +/-0.1 dB
- Mic, 20 - 20 kHz +/-0.3 dB
Noise:
- Line, better than -90 dB, 20 - 20 kHz
- Mic, -125 dB EIN
Crosstalk/Muting:
- Better than 80 dB between any outputs@ 1 kHz
Harmonic Distortion:
- Less than 0.03% THD, 20 - 20 kHz
Intermodulation Distortion:
- Less than 0.02% SMPTE