Get $25 back on your trade-in!
Trade in your functioning wireless system from any manufacturer, make or model, and purchase a qualifying Sennheiser wireless system. Earn $25 back. Effective until 3/31/23. Please view the Rebate tab for the Trade-in Form and FAQ.
Part of the Sennheiser XSW-D digital wireless system, the XSW-D INSTRUMENT RX 1/4" plug-on receiver is available as an individual component to be used as a backup receiver or as a replacement unit. It features a 1/4" male connector ready to plug directly into the input of your amplifier or pedal.
XSW-D receiver with 6.3mm (1/4”) output.
- System
- Frequency Range: 2.400 to 2.483 GHz
- Latency: <4 ms with aptX Live Codec
- Transmission Range : 250' / 76.2 m (Line of Sight)
- Simultaneous Operation of Units: Up to 5 Systems Simultaneously
- Frequency Response: 10 Hz to 18 kHz
- Signal-to-Noise Ratio: ≥106 dB
- THD: <0.1 %
- Modulation: GFSK with TDMA
- Operating Temperature: -10 to 55° C / 14 to 131° F
- Relative Humidity: 95% (Non-Condensing)
- Receiver
- Type: 1/4" Plug-In Receiver
- Output Connector: 1/4" / 6.3 mm TS, Male, Foldable (90°)
- Audio Output Level: Instrument-Level Output Only
- Battery Type: Built-In, USB-Rechargeable, Lithium-Ion
- Battery Life: 5 Hours
- Charging Time: 3 Hours (Typical)
- Charging Cycles: Up to 1000 Cycles
- Nominal Voltage: 3.7 V
- Cell Capacity: 850 mAh
- Input Voltage: 5.0 V (Typical)
- Charging Temperature: 32 to 140° F / 0 to 60° C
- Dimensions 8 x 0.9 x 1.1" / 122 x 24 x 28 mm
- Weight: Not Specified by Manufacturer
Sennheiser XSW-D INSTRUMENT RX Downloads
Manual - As of 1/16/2023
Spec Sheet - As of 1/16/2023
Product documents are provided as a courtesy and may not reflect the most up-to-date information. Please contact us for the most up-to-date information.
