Studio Technologies Model 5205 brings excellent audio quality including low distortion and noise.
The Model 5205 Mic/Line to Dante Interface is a general-purpose audio device that supports applications utilizing the Dante Audio-over-Ethernet media networking technology. Two analog microphone or line-level audio signals can be connected to the Model 5205. They are amplified as required and then converted to digital audio channels on an associated Dante connection. With the inherent interoperability of Dante, the Model 5205 can be used with other Studio Technologies Dante-enabled products or a multitude of devices from many other manufacturers.
Microphone or line-level balanced analog audio signals are connected using two 3-pin XLR connectors. Using front-panel pushbutton switches the gain of the associated microphone preamplifier circuitry can be selected for 0, 20, 30, 40, 50, or 60 dB. P48 phantom power is provided to support condenser microphones. Separate pushbutton switches control the on/off status of phantom power. LEDs display the status of the gain and phantom power functions. Multi-step LED meters provide confirmation of the level of the two Dante transmitter (output) audio channels.
The audio quality of the Model 5205's two audio channels is excellent, with low distortion, low noise, and high headroom. Careful circuit design and rugged components ensure long, reliable operation. A wide range of applications can be supported, including TV, radio, and streaming broadcast events, corporate and government AV installations, and post-production facilities.
The Model 5205 requires an Ethernet connection to supply both the data interface as well as Power-over-Ethernet (PoE) power. This requires an Ethernet connection from a PoE-enabled Ethernet switch. Alternately, the Model 5205 can be powered by an external midspan PoE power injector.
- Dante Audio-over-Ethernet technology
- Two analog mic/line inputs to Dante digital audio outputs
- Selectable preamplifier gain and P48 phantom power
- Audio channel level metering
- Excellent audio quality
- Power-over-Ethernet (PoE) powered
- Standard connectors; compact, lightweight design
Network Audio Technology:
- Type: Dante Audio-over-Ethernet
- Bit Depth: 24
- Sample Rates: 44.1, 48, 88.2, and 96 kHz
- Number of Dante Transmitter (Output) Channels: 2
- Dante Audio Flows: 2 transmitter
- Analog to Digital Equivalence: a +4 dBu input with 0 dB gain selected results in a Dante digital output level of -20 dBFS
Network Interface:
- Type: twisted-pair Ethernet with Power-over-Ethernet (PoE)
- Data Rate: 100 Mb/s (10 Mb/s Ethernet not supported)
Power: Power-over-Ethernet (PoE) per IEEE 802.3af class 2 (low power, ≤6.49 watts)
General Audio Parameters:
- Frequency Response (48 kHz Sample Rate): +0.0/-0.5 dB, 20 Hz to 22 kHz
- Frequency Response (96 kHz Sample Rate): +0.0/-0.5 dB, 20 Hz to 40 kHz
- Distortion (THD+N): 0.001% (-100 dB) at -1 dBFS, 40 dB gain, 22 kHz bandwidth
- Dynamic Range: greater than 114 dB, 0 dB gain, A-weighted
- EIN: -123 dBu, 22 kHz bandwidth, 60 dB gain, 150 ohm source resistance
- IMD (SMPTE): less than 0.002%, 60 Hz/7 kHz, 4:1, -20 dBFS
Mic/Line Inputs: 2
- Type: electronically balanced
- Input Impedance: 3.7 k ohms
- CMRR: greater than 75 dB, 20 Hz to 22 kHz, 40 dB gain
- Input Gain, Nominal (Button Selected): 0 (line), 20, 30, 40, 50, and 60 dB
- Input Gain, Actual (Button Selected): 0 (line), 19, 31, 40, 49, and 61 dB
- Input Gain (Remote Control Selected): 0 dB (line), 10 dB, 19-70 dB in 3-dB steps
- Compatibility: dynamic, ribbon, or phantom-powered mics
- Phantom Power: P48 per IEC 61938 standard, +45 volts DC nominal, on/off selectable
Meters: 2
- Function: displays level of Dante transmitter (output) signals
- Type: 8-segment LED, modified VU ballistics
Connectors:
- Mic/Line Inputs: 3-pin female XLR
- Ethernet: Neutrik etherCON RJ45
- USB: type A receptacle
Dimensions (Overall):
- 4.2 inches wide (10.7 cm)
- 1.7 inches high (4.3 cm)
- 5.1 inches deep (13.0 cm)
- Mounting Option: bracket kit
- Weight: 0.8 pounds (0.35 kg)