The SurgeX FLATPAK SA82 is specifically designed for flat panel displays or applications where you need the best protection and conditioning but don't have much space to work with. The Flatpak features two outlets and the same unmatched surge protection and power conditioning that you have come to expect from SurgeX.
- Series Mode® Surge Protection
- Impedance Tolerant® EMI/RFI Filtering
- Over Voltage Shutdown (w/ Auto Reset)
- Load Rating: 8 amps @ 120 volts
- Power Requirement (no load): 10 watts
- UL 1449-2 Adjunct Classification Test Results: 1000 surges, 6000 volts, 3000 amps, C1 pulse, measured suppressed voltage 290 volts, no failures
- Federal Guidelines: Grade A, Class 1, Mode 1 (CID A-A-55818)
- EMI/RFI Filter, Normal Mode (50-ohm load): 40 dB @ 100 kHz; 50 dB @ 300 kHz; 50 dB @ 3 MHz; 50 dB @ 30 MHz
- EMI/RFI Filter, Common Mode (50-ohm load): 18 dB @ 300 kHz; 30 dB @ 1 MHz; 50 dB @ 5 MHz; 50 dB @ 20 MHz
- Maximum Applied Surge Pulse Joule Rating: Unlimited, due to current limiting (8 x 20 µs)
- Maximum Applied Surge Pulse Voltage: 6000 volts (1.2 x 50 µs pulse), industry standard rating
- Maximum Applied Surge Pulse Current: 100,000 amperes (8 x 20 µs)
- Endurance: IEEE C62.41-1991 Category B3 (C1)
- Pulses: 1 kv>500,000; 3 kv>10,000; 6 kv>1000
- Overvoltage Shutdown: 145 volts (resume at 135 volts)
- Dimensions: 1.75" H x 5.31" W x 9.06" D
- Weight: 3.4 lbs
- Temperature Range: 5º to 35º C
- Humidity Range: 5% to 95% R.H., non-condensing
- Agency Listings (Pending): ETL and cETL (UL 1449, 2nd edition; CSA C22.2 No.8-M1986, R2000)
NOTE: Pictured in silver.
