Unique Next-Generation Approach to DSP
Innovative and distinctive. A family of audio processors with zero learning curve and powerful DSP is called Jupiter. Jupiter upholds our dedication to clear sound by building on the world-class open architecture DSP platforms from Symetrix.
3 configurations for audio input and output. Jupiter 4, Jupiter 8, and Jupiter 12 all have inward and outward motions of four times each.
Feature-Rich to Cost Ratio. Installation costs are reduced by almost zero programming time.
85 ready-to-use apps. Mixing and routing, public address / distribution, sound reinforcement, and special purpose DSP are among the categories. Simple or complex signal routing is thoroughly tested and ready to use right out of the box.
Symetrix Jupiter Series Features
- Turn-Key Audio Processing Solution
- Uses Downloadable "Apps"
- Several App Categories Available
- Mixing, Routing & Sound Reinforcement
- Public Address & Distribution
- Special Purpose Signal Processing
- Mic/Line Inputs with Phantom Power
- Ethernet & Logic Outputs x 4
- External Control Inputs x 2
- ARC Ports x 2
-
Inputs
- Number of Inputs:Twelve (12), eight (8), or four (4) switchable balanced mic or line level on Jupiter 12, 8 or 4 respectively.
- Connectors:3.81 mm terminal blocks.
- Nominal Input Level:+4 dBu line or -36 dBu mic level (software selectable) with 20 dB of headroom.
- Mic Pre-amp Gain: +40 dB.
- Input Trim: +/- 24 dB.
- Maximum Input Level: +23 dBu.
- Input Impedance: 18 kΩ balanced, > 9 kΩ unbalanced, > 2 kΩ with phantom power engaged.
- CMRR: > 50 dB @ 1 kHz, unity gain.
- Mic Pre-amp EIN: < -125 dBu, 22 Hz - 22 kHz, 100 Ω source impedance.
- Phantom Power: +20 VDC, 20 mA maximum per input.
- Space Required: 1U (WDH: 48.02 cm x 19.05 cm x 4.37 cm / 18.91 in x 7.5 in x 1.72 in), depth is specified from front panel to back of connectors. Allow at least 3 inches additional clearance for rear panel connections. Additional depth may be required depending upon your specific wiring and connections.
- Electrical: 100-240 VAC, 50/60 Hz, 25 Watts maximum. Universal input.
- Ventilation: Maximum recommended ambient operating temperature is 30 C / 86 F. Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in minimum clearance). The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.
- Certifications or Compliance: UL 60065, cUL 60065, IEC 60065, EN 55103-1, EN 55103-2, FCC Part 15, RoHS
- Shipping Weight: 7.5 lbs. (3.4 kg)
- Number of Outputs: Four (4), eight (8), or four (4) line level on Jupiter 12, 8 or 4 respectively.
- Connectors: 3.81 mm terminal blocks.
- Nominal Output Level: +4 dBu line level with 20 dB of headroom. For unbalanced analog output, do not connect the minus output terminal. Unbalanced configuration results in 6 dB lower output level.
- Maximum Output Level: +24 dBu.
- Output Impedance: 200 Ω balanced, 100 Ω unbalanced.
- Sample Rate: 48 kHz.
- Frequency Response: 20 Hz - 20 kHz, +/- 0.5 dB.
- Dynamic Range: > 110 dB (A-Weighted), input to output.
- THD+Noise: < -85 dB (un-weighted); 1 kHz @ +22 dBu with 0 dB gain.
- Interchannel Crosstalk: < -90 dB @ 1 kHz, typical.
- Latency: < 1.6 ms, input to output with all DSP inactive.
Mechanical Data
Outputs
System
Symetrix Jupiter Series Downloads
Manual - As of 2/7/2023
Spec Sheet - As of 2/7/2023
Product documents are provided as a courtesy and may not reflect the most up-to-date information. Please contact us for the most up-to-date information.
