Expand Your I/O Even Further
The cost-effective xIn 12 or xOut 12 expands a system's analog input or channel capacity, lowering the cost per channel overall. Each of the twelve analog I/O's parameters, as well as bus assignments, are set using SymNet Composer open architecture software and are specifically intended for use with Edge and Radius DSP units. There are no mechanical switches or circuit board jumpers to set up during the straightforward and speedy xIn 12 or xOut 12 setup.
Symetrix XIO 12 Series Features
- Built-in network switches. Direct connections to Radius, Prism and Edge DSP’s.
- Internal power supplies.
- xIn 12 – 12 analog mic/line inputs.
- xOut 12 – 12 analog mic/line outputs.
- Sampling rate: 48 kHz, ± 100 ppm.
- Frequency response (A/D):20 Hz – 20 kHz, ± 0.5 dB.
- Channel separation (A/D): > 111 dB @ 1 kHz, +24 dBu.
- Dante cable: Standard CAT6, maximum device to device length = 100 meters.
- Connectors: 3.81 mm terminal blocks.
- Number of inputs: Twelve (12) switchable balanced mic or line level.
- Nominal input level: +4 dBu with 20 dB of headroom.
- Maximum input level: +23 dBu.
- Mic pre-amp gain: 0, 11.8, 24, 44 or 54 dB switchable.
- Mic pre-amp EIN: < -127 dB with 150 Ohm source impedance.
- Input impedance: 8k Ohms balanced, 4k Ohms unbalanced.
- Phantom power (per input): +48 VDC @ 10 mA maximum.
- Dynamic range: > 116 dB, A-weighted.
- THD + Noise: < -100 dB, unweighted; 1 kHz @ +22 dBu with 0 dB gain.
- Latency: 0.28 mS.
General Specifications (XOUT 12)
- Sampling rate: 48 kHz, ± 100 ppm.
- Frequency response (D/A): 20 Hz – 20 kHz, ± 0.5 dB.
- Channel separation (D/A): > 111 dB @ 1 kHz, +24 dBu.
- Dante cable: Standard CAT6, maximum device to device length = 100 meters.
- Connectors: 3.81 mm terminal blocks.
- Number of outputs: Twelve (12) balanced line level.
- Nominal output level: +4 dBu with 20 dB of headroom.
- Maximum output level: +24 dBu (+22.8 dBu into a 2k Ohm minimum load).
- Output Impedance: 300 Ohms balanced, 150 Ohms unbalanced.
- Dynamic Range: > 118 dB, A-weighted.
- THD+Noise: < -105 dB, unweighted; 1 kHz @ +22 dBu with 0 dB gain.
- Latency: 0.60 mS.
Mechanical Data
- Space Required: 1U (WDH: 18.91 in x 9.5 in x 1.72 in / 48.02 cm x 24.13 cm x 4.37 cm). Depth does not include connector allowance. Allow at least 3 inch additional clearance for rear panel connections. Additional depth may be required depending upon your specific wiring and connections.
- Electrical: 100-240 VAC, 50/60 Hz, 25 Watts maximum universal input. No line voltage switching required.
- Ventilation: Maximum recommended ambient operating temperature is 30 C / 86 F. Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in. minimum clearance). The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.
- Shipping Weight: 12 lbs. (5.4 kg).
- Certifications or Compliance: UL 60065, cUL 60065, IEC 60065, EN 55103-1, EN 55103-2, FCC Part 15, RoHS.
Symetrix XIO12 SERIES Downloads
Manual - As of 2/2/2023
Spec Sheet (XIN 12) - As of 2/2/2023
Spec Sheet (XOUT 12) - As of 2/2/2023
Product documents are provided as a courtesy and may not reflect the most up-to-date information. Please contact us for the most up-to-date information.
