Take Your Audio With Dante To the Next Level
The Symetrix Dante I/O Expanders require Composer for setup and can be used with Symetrix Radius, Prism, and Edge DSPs. Switches, circuit board jumpers, mechanical adjustments, and the need for external software programs are all not needed when using Composer.
Symetrix XIO4 Series Features
- 1/2 Rack Form Factor.
- PoE – injectors included.
- xIn 4 – 4 analog mic/line inputs.
- xIO 4×4 – 4 analog mic/line inputs + 4 analog outputs.
- xOut 4 – 4 analog outputs.
- Optional rack and surface mounting kits sold separately.
- Frequency Response: 20 Hz – 20 kHz, ± 0.5 dB.
- Channel Separation: > 111 dB @ 1 kHz, +24 dBu.
- Connectors: 3.5 mm Phoenix® connectors.
- Number of Inputs: Four (4) switchable balanced mic or line level.
- Nominal Input Level: +4 dBu with 20 dB of headroom.
- Maximum Input Level: +23 dBu.
- Mic pre-amp gain: 0, 11.8, 24, 44 or 54 dB switchable.
- Mic pre-amp EIN: < -127dB with 150 ohm source impedance.
- CMRR: > 76 dB @ 1 kHz, unity gain.
- Input impedance: 8k Ohms balanced, 4k Ohms unbalanced.
- Phantom power (per input): +48 VDC @ 10 mA maximum.
- Dynamic range: > 116 dB, A-weighted.
- THD + Noise:< -100 dB, unweighted; 1 kHz @ +22 dBu with 0 dB gain.
- Latency: 0.28 mS.
Mechanical Specifications
- Space Required: Half rack unit (WDH: 20.83 cm x 22.86 cm x 4.37 cm / 8.2 in. x 9 in. x 1.72 in.) Depth does not include connector allowance. Allow at least 3 inches additional clearance for rear panel connections. Additional depth may be required depending upon your specific wiring and connections.
- Electrical: PoE IEEE 802.3af Class 0, 10 Watts maximum. No line voltage switching required (100-250 VAC, 50-60 Hz).
- Ventilation: Maximum recommended ambient operating temperature is 30 C / 86 F. Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in minimum clearance). The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.
- Certifications or Compliance: UL 60065, cUL 60065, IEC 60065, FCC 15.109:2015, FCC 15.109(g):2015, FCC 15.107:2015, (CISPR 32), EN 55032:2012, EN 55103-2:2009, EN 61000-3-3:2013, EN 61000-3-2:2006, ICES-003:2012, RoHS.
- Shipping Weight: 4.4 lbs. (2.0 kg)
Analog Outputs (xIO 4x4, xOut 4)
- Frequency Response: 20 Hz – 20 kHz, ± 0.5 dB.
- Channel Separation: > 111 dB @ 1 kHz, +24 dBu.
- Connectors: 3.5 mm Phoenix® connectors.
- Number of outputs: Four (4) balanced line level.
- Nominal output level:+4 dBu with 20 dB of headroom.
- Maximum output level: +24 dBu (+22.8 dBu into a 2k Ohm minimum load).
- Output impedance: 300 Ohms balanced, 150 Ohms unbalanced.
- Dynamic range: > 118 dB, A-weighted.
- THD + Noise: < -105 dB, unweighted; 1 kHz @ +22 dBu with 0 dB gain.
- Latency:0.60 mS.
System
- Sampling Rate: 48 kHz, ± 100 ppm.
- Dante Cable: Standard CAT6, maximum device-to-device length = 100 meters.
Symetrix XIO4 SERIES Downloads
Manual - As of 2/1/2023
Spec Sheet - As of 2/1/2023
Product documents are provided as a courtesy and may not reflect the most up-to-date information. Please contact us for the most up-to-date information.
