Priced individually but only sold in pairs!

The CMS 1201DC is a powerful state-of-the-art large format in-ceiling loudspeaker device conceived, designed and built to complement Tannoy's existing class-leading CMS range. From the pioneers of point source and large format ceiling speakers the CMS 1201DC is engineered from the ground up with superior full-range performance in mind to handle demanding distributed sound applications such as ballrooms, shopping malls, sports halls, airports and other high ceiling installations.

Built around a new evolution of the high power handling 12" (300mm) Dual Concentric™ point source driver, the CMS 1201DC delivers best-in-class performance for the most even beamwidth and pattern control over the widest range of frequencies of any largeformat ceiling speaker. Coupled with exceptional clarity, ultra low distortion, and high SPLs, Tannoy has again raised the bar to give the absolute cutting edge performance in ceiling mounted loudspeaker technology

Notes:

1. Average over stated Bandwidth. Measured in an IEC baffle in an Anechoic Chamber
2. Unweighted Pink noise input, measured at 1m on axis
3. Long term power handling capacity as defined in EIA - 426B test

• 12” (305mm) point source Dual Concentric™ driver with Ferrofluid cooled Neodymium HF

• High power & high sensitivity with extended LF response and very low distortion

• Highly controlled full-bandwidth 90 degree dispersion

• High power handling (400W rec. power), high SPL (120dB sustained average)

• Highly versatile back-can installation options

• 79 litre Back-can lined with OSB2 board for optimum acoustic performance

• Designed to meet UL-1480 and UL-2043 Listing specification

• One-man install thanks to quick-fix baffle fitment

• Available with optional low insertion loss 60W line transformer

• 5-year warranty

System

• Frequency Response (-3dB) (1)
  • 60Hz - 20kHz

• Frequency Range (-10dB) (1)
  • 45Hz - 30kHz

• System Sensitivity (1W @1m) (2)
  • 97dB (1W = 2.83V for 8 Ohms)

• Nominal Coverage Angle
  • 90 Degrees Conical

• Coverage Angle (1kHz to 16kHz)
  • 90 Degrees Conical

• Crossover
  • 1.6kHz - 2nd order LF, 2nd order HF

• Directivity Factor (Q)
  • 8.9

• Directivity Index (DI)
  • 9.5

• Rated Maximum SPL (2)
  
  • Average
    • 120dB
  • Average - With THP60
    •  115dB
  • Peak
    • 126dB

• Power Handling
  
  • Average
    • 200W
  • Programme
    • 400W
  • Peak
    • 800W

• Recommended Amplifier Power
  • 400W @ 8 Ohms

• Nominal Impedance
  • 8 Ohms

Physical

• Enclosure
  
  • Backcan
    • 1.6 mm black powder coated steel, damped with 11 mm OSB board
  • Baffle
    • 1.2 mm black powder coated steel

• Grille
  • 1.0 mm white powder coated perforated steel

• Connectors
  • Terminal barrier strip inside the can, with loop thru capability

• Safety Features
  • Safety ring locted at the rear of enclosure for load bearing safety bond

• Cable Entry Options 2
  • 0mm and 28mm on knockouts

• Conduit Knockouts
  • 4 sides + top

• Safety Agency Ratings (pending)
  • UL-1480, UL-2043, CE

• Dimensions HxWxD
  • 331mm x 725mm x 516mm

• High ceiling applications

• Shopping malls

• Transport hubs

• Ballrooms

• Boardrooms / Corporate AV

• Convention Centres

• Cruise Ships

• Large Bars & Restaurants