Priced individually but only sold in pairs!

Built around the CMS 3.0 platform, the third generation of TANNOY's revolutionary Ceiling Monitor System technology, the SCMS 403DCe offers the revolutionary new Dual Concentric driver in a compact 100 mm (4 inch) size. Delivering wider and more consistent broadBand directivity, even greater intelligibility and a more accurate response, the CMS 403DCe is deal for smaller installations and compact living spaces.

The CMS 403DCe also features extra clamp extension to accommodate thicker ceiling panels, and a locking design that prevents inadvertent over-tightening. Specifically designed for fast, simple and cost effective installation in new and existing buildings, the CMS 403DCe can be entirely angled towards the listener within the fixed ceiling-mounting ring. By discreetly pivoting the loudspeaker towards the desired area of coverage, the problems of difficult speaker placement - particularly in less than perfect room configurations – are easily overcome.

Notes

(1) Average over stated Bandwidth. Measured in an IEC baffle in an Anechoic Chamber
(2) Unweighted Pink noise input, measured at 1m on axis
(3) Long term power handling capacity as defined in EIA - 426B test

• Full range ceiling loudspeaker for installation applications

• 40 Watts continuous, 160 Watts peak power

• Next generation 4" Dual Concentric point source driver featuring Omnimagnet technology

• Torus Ogive waveguide for improved high frequency response and directivity

• Blind Mount enclosure supplied with integral moulded ABS back can

• Integrated single unit construction for ease of installation

• Adjustable tilt angle with 360' rotation to accommodate difficult loudspeaker placements

• Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input

• Low insertion loss 30 W line transformer with easily accessible tapping switch

• Optimised for LAB GRUPPEN low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel

• Semi matt white finish fits unobtrusively in any environment

• Powder coated UV resistant perforated steel mesh grille with dust protection

• Removable grille for custom painting

• Self-aligning 3 way clamp mounting system

• Mounting C-ring and ceiling tile rails included

• 5-Year Warranty Program*

• Designed and engineered in the U.K.

• Frequency Response (-3 dB) (1) BM Backcan
  • 110 Hz - 50 kHz

• Frequency Range (-10 dB) (1)  BM Backcan
  • 80 Hz - 54 kHz

• System Sensitivity (1W @ 1 m) (2)
  • 88 dB (1 W = 4 V for 16 Ohms)

• Nominal Coverage Angle
  • 90 degrees conical

• Power Handling (3)
  • Average:
    • 60 W
  • Programme:
    • 120 W
  • Peak:
    • 240 W

• Recommended Amplifier Power
  • 120 W @ 16 ohms

• Nominal Impedance (Lo, Z)
  • 16 Ohms

• Rated Maximum SPL
  • Average:
    • 107 dB
  • Peak:
    • 113 dB

• Transformer Taps (via front rotary switch)
  • 70 V:
    • 30 W (165 O) / 15 W (330 O) / 7.5 W (660 O) / 3.75 W (1320 O) / OFF & low impedance operation
  • 100 V:
    • 30 W (330 O) / 15 W (660 O) / 7.5 W (1320 O) / OFF & low impedance operation

• TRANSDUCERS
  
  • Dual Concentric
    • point source driver 1 x 100 mm (4.0”) Dual Concentric driver, using Omnimagnet technology
  • Low Frequency
    • 35 mm (1.38”) voice coil, treated multi fiber paper pulp cone
  • High Frequency
    • 20 mm (0.79”) PEI dome

• PHYSICAL
  
  • Enclosure
    • Backcan: Reflex loaded UL 94V-0 rated ABS
    • Baffle: Reflex loaded UL 94V-0 rated ABS
    • Grille: Steel, with weather resistant coating
  • Safety Features
    • Safety ring located at rear of enclosure for load bearing safety bond
  • Clamping Design
    • Security toggle clamp
  • Blind Mount (BM)
    • Complete with fixed backcan
  • Cable Entry Options
    • Cable clamp & squeeze connector for conduit up to 22 mm
  • Conduit Knockouts on PI Backcan
    • 3 Sets of horizontal positions 19 / 22 / 28 mm (0.75” / 0.87” / 1.10”)
  • Connectors
    • Removable locking connector with screw terminals with “loop through” facility

• Dimensions
  
  • Bezel diameter
    • 205.0 mm (8.07”)
  • Front of ceiling to rear of pod
    • 147.6 mm (5.81”)
  • Hole cutout diameter
    • 187 mm (7.36”)
  • Net Weight (ea)
    • 2.75 kg (6.06 lbs)
  • Packed Quantity
    • 2

• Included Accessories
  • C Ring
  • Tile bridge
  • Paint mask
  • Cutout template
  • Grille

• Optional Accessories
  • Plaster (Mud) ring