Tannoy 8001 7530 CMS 603ICT PI 6" Dual Concentric Ceiling Speaker

Info

Priced individually but only sold in pairs!

With a frequency range of 46 Hz-24 kHz (PI Backcan version), continuous program power handling of 120 Watts, sensitivity of 91 dB/Watt and 90 degree conical dispersion pattern the CMS 603ICT is ideal for medium to large sized rooms or installations requiring arrays of in-ceiling speakers to cover a large area.

The point source configuration of the TANNOY ICT driver’s mid-bass and tweeter sections ensures a wide and controlled dispersion for optimum coverage and greater intelligibility. Use of wireless electromagnetic coupling to drive the tweeter means that no crossover is required, making the ICT drive unit exceptionally reliable and ideal for applications where constant heavy usage is anticipated. The mineral-loaded polypropylene cone material and nitrile rubber surround further enhance durability and long-term reliability.

Notes

(1) Average over stated Bandwidth. Measured in an IEC baffle in an Anechoic Chamber
(2) Unweighted Pink noise input, measured at 1m on axis
(3) Long term power handling capacity as defined in EIA - 426B test

Frequency Response (-3 dB) (1) BM Backcan
- 51 Hz - 24 kHz

Frequency Range (-10 dB) (1) BM Backcan
- 74 Hz - 24 kHz

Coverage Angle (1 kHz to 6 kHz)
- 105 degrees

Nominal Coverage Angle
- 90 degrees conical

System Sensitivity (1 W @ 1 m) (2)
- 91 dB (1 W = 4 V for 16 Ohms)

Frequency Range (-10 dB) (1) PI Backcan
- 46 Hz - 24 kHz

Directivity Factor (Q)
- 7.1 averaged 1 kHz to 6 kHz

Directivity Index (DI)
- 7.9 averaged 1 kHz to 6 kHz

Power Handling (3)
- Average:
  - 60 W
- Programme:
  - 120
- Peak:
  - 240 W

Recommended Amplifier Power
- 120 W @ 16 ohms

Nominal Impedance (Lo,Z)
- 16 ohms

Rated Maximum SPL
- Average:
  - 109 dB
- Peak:
  - 115 dB

Transformer Taps (via front rotary switch)
- 70 V:
  - 60 W (83 O) / 30 W (165 O) / 15 W (330 O) / 7.5 W (660 O) / OFF & low impedance operation
- 100 V:
  - 60 W (83 O) / 30 W (330 O) / 15 W (660 O) / OFF & low impedance operation

Crossover
- 7 kHz inductively coupled

TRANSDUCERS
- Low Frequency
  - 165 mm (6.50") mineral loaded polypropylene
- High Frequency
  - ICT aluminium dome

PHYSICAL
- Enclosure
  - Backcan: Zinc plated steel
  - Baffle: Reflex loaded
  - UL 94V-0 rated ABS
  - Grille: Steel, with weather resistant coating
- Safety Features
  - Safety ring located at rear of enclosure for load bearing safety bond
- Clamping Design
  - Security toggle clamp

Backcan Options
- Blind Mount (BM)
  - Complete with fixed back can
- Pre Install (PI)
  - Separate backcan for pre-installation
- Cable Entry Options
  - Cable clamp & squeeze connector for conduit up to 22 mm
- Conduit Knockouts on PI Backcan
  - 3 Sets of horizontal positions 19 / 22 / 28 mm (0.75" / 0.87" / 1.10")
- Connectors
  - Removable locking connector with screw terminals with "loop through" facility
- Compliance
  - UL-1480, UL-2043, CE

Dimensions
- Bezel diameter
  - 274.0 mm (10.79")
- BM Model: Front of ceiling to rear of back can
  - 256.5 mm (10.10")
- BM Model: Front of ceiling to top of safety loop
  - 273.8 mm (10.78")
- PI Model: Front of ceiling surface to rear of speaker unit
  - 100.0 mm (3.94")
- PI Model: Front of accessory backcan bezel to top of safety loop
  - 168.5 mm (6.60")
- Hole cutout diameter
  - 253 mm (9.96")

Net Weight (ea)
- CMS 603ICT BM
  - 5.41 kg (11.93 lbs)
- CMS 603ICT PI
  - 2.64 kg (5.82 lbs)
- PI Backcan
  - 3.68 kg (8.11 lbs)
- Packed Quantity:
  - 2