The 3U rack-mount MZ-372 enables audio signals to be mixed, muted, and routed to 2 redundant outputs or destinations. Each of its 6 audio channels has an independent volume control and features 2 stereo sets of unbalanced RCA line-level inputs (12 RCA inputs, total) and 6 balanced XLR mic/line (switchable) inputs on the rear panel, plus a mic-level XLR input on the front panel. Channels 1, 2, and 3 can be switched to accommodate phono-level signals for use with a turntable. A pair of unbalanced RCA Booth outputs provide an additional feed with independent control for monitoring and can be switched between stereo and mono operation.
Each of the MZ-372's dual outputs offer balanced XLR and unbalanced RCA jacks, enabling long cable runs or connection to a main mixer and monitor mixer, professional power amplifier, or residential power amplifier or powered speaker. A Talkover function automatically lowers other source levels when microphones are in use. A separate pair of unbalanced, line-level RCA recording outputs make it simple to capture events.
Like the MZ-223, the MZ-372 employs front-panel volume sliders, routing switches and buttons, EQ knobs, and mute buttons for simple, fast setup and operation. The front panel also includes a ¼-inch stereo headphone output with level control.
- Maximum flexibility for audio routing, input selection, and multiple redundant output flow, perfect for integrator, musical instrument, and residential applications
- Multiple inputs include 12 sets of stereo RCA-type, 6 selectable mic/line XLR, and a dedicated front-panel XLR mic input; 19 total input “sets”
- Channel audio sources can easily be selected, muted, and contoured via simple volume sliders, toggle switches/buttons, and knobs
- Two redundant output channels each with stereo XLR balanced and unbalanced RCA-type connectors; each with separate volume control
- Separate stereo booth, recording, and headphone outputs each with independent control
- One additional mic-compatible XLR input on the front panel with “Talkover” function automatically lowering source audio
- Independent three-band EQ per each of the 5 channels and a two-band EQ on the additional front panel microphone input
- Compact 3U rack mount design
Audio inputs
MAIN MIC INPUT (BALANCED) jacks
Connectors XLR-3-31 (1 GND, 2 HOT, 3 COLD)
6.3mm (1/4”) standard TRS jacks (Tip HOT, Ring COLD, Sleeve GND)
Input impedance 33 kΩ
Nominal input level -65 dBu (VOLUME knob at MAX)
Nominal input level -10 dBu (VOLUME knob at MIN)
Gain range 55 dB
INPUTS MIC (BALANCED) jacks
Connectors XLR-3-31 (1 GND, 2 HOT, 3 COLD)
Set to MIC
Maximum input level -10 dBu
Minimum input level -65 dBu
Input impedance 33 kΩ
Set to LINE
Nominal input level -1 dBu
Maximum input level 20 dBu
Input impedance 22 kΩ
INPUTS LINE (UNBALANCED) jacks
Connectors RCA pin jacks
Nominal input level -10 dBV
Maximum input level 10 dBV
Input impedance 22 kΩ
Audio outputs
MAIN OUTPUTS (UNBALANCED) jacks
Connectors RCA pin jacks
Rated output level -10 dBV
Maximum output level 6 dBV
Output impedance 200 Ω
MAIN OUTPUTS (BALANCED) jacks
Connectors XLR-3-32 (1 GND, 2 HOT, 3 COLD)
Rated output level 4 dBu
Maximum output level 24 dBu
Output impedance 200 Ω
SUB OUTPUT connectors
Connectors RCA pin jacks
Rated output level -16 dBV
Maximum output level 0 dBV
Output impedance 200 Ω
MONITOR OUT jacks
Connectors RCA pin jacks
Rated output level -16 dBV
Maximum output level 0 dBV
Output impedance 200 Ω
PHONES jack
Connectors 6.3mm (1/4”) standard stereo jack
Maximum output 50 mW + 50 mW (into 32 Ω load)
Audio performance
Frequency response
20 Hz–20 kHz
Distortion
0.03% or less
Crosstalk
65 dB
General
Power
Dedicated AC adapter (TASCAM PS-M1524)
Input voltage AC 100–240V ~, 50/60Hz
Output voltage DC 15V
Output current 2.4 A
Power consumption
35 W
Dimensions
482.0 (19”) × 132.0 (5 1/8”) × 93.2 mm (3 5/8”) (width × height × depth, including protrusions)
Weight
3.2 kg (7.05 lb)
